Pantallas poopblom turing 30

[reefsanz]

Hola compañeros me gustaría saber si algún compañero usa alas pantallas poopblom turing 30 o si a cambiado los leds porque si pongo las pantallas mucho % se ve muy blanco y Ami me gustaría verlo más azul

 

[dstockwell]

Hello colleagues, I would like to know if any of your colleagues use some poopblom turing 30 screens or if they have changed the leds because if I put the screens on a lot, it looks very white and I would like to see it bluer

 

[dedragon]

you should be able to turn down the blue frequency on the controller. Sorry I can read spanish well but I am terrible at typing correctly using it

 

[dedragon]

Alternatively, you can add a couple of white led strips like orphek or3 bars in reef day color. I wouldnt try to replace leds in the popbloom 30 as it is too much of a hassle

 

[reefsanz]

Hola compañeros, quisiera saber si alguno de sus compañeros usa algún poopblom turing 30 pantallas o si le han cambiado los leds porque si pongo mucho las pantallas se ve muy blanco y me gustaría verlo más azul

gracias intentare el próximo ponerlo en inglés

 

[reefsanz]

Alternativamente, puede agregar un par de tiras de led blancas como orphek o 3 barras en el color del día del arrecife. No intentaría reemplazar los LED en el popbloom 30 ya que es una m problema

Debería poder bajar la frecuencia azul en el controlador. Lo siento, puedo leer bien el español, pero soy terrible escribiendo correctamente al usar

debería poder bajar la frecuencia azul en el controlador. Lo siento, puedo leer bien el español, pero soy terrible escribiendo correctamente al usarlo.

Me gusta más azul no podría bajarlos más pero si se bajan los blancos no hay suficiente potencia en la pantalla

 

[reefsanz]

Alternativamente, puede agregar un par de tiras de led blancas como orphek o 3 barras en el color del día del arrecife. No intentaría reemplazar los LED en el popbloom 30 ya que es una molestia.

Ya e cambiado algún led es fácil de cambiar

 

[dedragon]

You can change out the leds than to make them more blue if you wanted. Sometimes it is just easier to add a blue led strip like this cheap one from aliexpress. It will be hard to figure out the amount of leds to replace in the popbloom through trial and error

https://www.aliexpress.us/item/2251832657411052.html?spm=a2g0o.productlist.main.1.502940d8I58Luk&algo_pvid=3878164e-6443-4be0-9fbe-615f25e60996&algo_exp_id=3878164e-6443-4be0-9fbe-615f25e60996-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000023689049356%22%7D&pdp_npi=3%40dis%21USD%2153.74%2142.99%21%21%21%21%21%402102188b16802048811182631d06fe%2112000023689049356%21sea%21US%214330578567&curPageLogUid=qHVVz469PzxP

 

[dedragon]

I will try to find a thread that has done this before, but i dont know if anyone has

 

[dedragon]

I would change out the 4500k (natural white), with some more 450nm royal blue cree leds if you choose to do that

 

[dedragon]

@oreo54 should have some more info on this, i trust them with any led information

 

[oreo54]

Well this is one led pattern they sell
Exactly which light are you referring to?

Theoretically changing diodes out isn't too complicated..
Of course every "program" is based on what is there. So if a lot of mods are done it is just best to go with a manual (custom) program.

There is a lot of info regarding how they are buit here. Freshwater light and adaptations though. https://www.plantedtank.net/threads...d-lights-into-4-independent-channels.1323477/

 

[reefsanz]

Bueno, este es un patrón de led que venden.
¿A qué luz te refieres exactamente?

Teóricamente, cambiar los diodos no es demasiado complicado.
Por supuesto, cada "programa" se basa en lo que hay. Entonces, si se realizan muchas modificaciones, es mejor optar por un programa manual (personalizado).

Hay mucha información sobre cómo se construyen aquí. Sin embargo, luz de agua dulce y adaptaciones. https://www.plantedtank.net/threads...d-lights-into-4-independent-channels.1323477/

Luego te paso una foto de mi pantalla es la misma pero con muchos más blancos que traen un saludo y gracias

 

[reefsanz]

Well this is one led pattern they sell
Exactly which light are you referring to?

Theoretically changing diodes out isn't too complicated..
Of course every "program" is based on what is there. So if a lot of mods are done it is just best to go with a manual (custom) program.

There is a lot of info regarding how they are buit here. Freshwater light and adaptations though. https://www.plantedtank.net/threads...d-lights-into-4-independent-channels.1323477/

Well, this is my screen, it has two rows of white and I want to put it all in blue, which ones do you advise me, was the scheme that I am going to put right?

 

[reefsanz]

And the 20,000k ones that I have 4 together, I would remove them and put them in blue because they are very close together and it will be very penetrating in a place without being distributed

 

[oreo54]

And the 20,000k ones that I have 4 together, I would remove them and put them in blue because they are very close together and it will be very penetrating in a place without being distributed

Hmmm there are a bunch of different "philosophies" you can apply to what blues you add where.
Let's start with the easiest channel.
Chl 2 looks to be what popbloom uses for moonlight. Their idea is to use violets.
2-395, 1-420.
You changed it to 3-20000K.
Your choice is to make it useful as moonlight or eliminate it all together like you suggested by making it all blue.


As to ch3 and 1 I think you should use at at a minimum 2 types of blue.
8-450 and 3-470 on each.

So that leaves ch4.
Nothing is set in stone. Use 420's not 410's ect..

Soo you have a "color" set and a blue set..
Lot of work changing all those diodes though..

 

[reefsanz]

Hmmm, hay un montón de "filosofías" diferentes que puedes aplicar a qué blues agregas dónde.
Comencemos con el canal más fácil.
Chl 2 parece ser lo que usa popbloom para la luz de la luna. Su idea es usar violetas.
2-395, 1-420.
Lo cambiaste a 3-20000K.
Tu elección es hacer que sea útil como la luz de la luna o eliminarlo todo junto como sugeriste haciéndolo todo azul.


En cuanto a ch3 y 1, creo que deberías usar como mínimo 2 tipos de azul.
8-450 y 3-470 en cada uno.

Así que eso deja ch4.
Nada está escrito en piedra. Use 420, no 410, etc.

Así que tienes un conjunto de "colores" y un conjunto azul..
Sin embargo, mucho trabajo cambiando todos esos diodos ...

Well, the truth is that I wouldn't care about the moon channel because it would only be for the night, really, if I could take advantage of it to use a better color

 

[reefsanz]

Well, the configuration of the screens has already been changed thanks to the friend Oreo, it was not so difficult but it was entertaining

 

[reefsanz]

Well, I already measured a couple of the led changes, thanks to Oreo, I'll give you the pair of screens