Paul’s 240 gallon upgrade!

A little bit of progress on the upstairs. The electric is done at the tank and the beam is up. It’s clean up time and moving onto the fish room.
IMG_0831.JPG


IMG_0835.JPG


IMG_0836.JPG


IMG_0837.JPG


IMG_0838.JPG


-Paul
 
As I look to making another 2 week tour away from home (I think it’s the last one), here’s a quick update of work done since my previous post.

Most of the equipment has been cleaned. Just little odds and ends like float switches and probes still left to do.

The fish room has been torn down and clean up down there is under way down there. This is perfect as it lets me correct some things I didn’t think about during the previous build.

The rack of equipment
c873d51629a5d2fc03cfe98482259fe5.jpg


Fishroom tear down
9d021b027e4111543e3a840d2862d93b.jpg


Spackled and awaiting paint. My fiancé loves painting so she volunteered.
39350447ba84f43d6e1961874336ec59.jpg


Anyway, once this is done, I’ll move on the running the electric extension and plumbing followed by filling the tank. My goal is for it to be wet on Black Friday. We’ll see!

-Paul
 
Okay, I actually had a few days at home and got quite a bit!

Walls touched up with paint, floors watched. New PVC molding and recaulked. Posts supporting the floor were cleaned of any rust using steel who’ll then painted with truck bed liner.
0084be8253e20571880c55254056acba.jpg


Today, I ordered the glass for baffles and will be installing them today. Once it’s dry (tonight or tomorrow), I’ll be moving the sump into the fishroom and start on plumbing.

Here’s the room as it sits
95a97957c85a2ceca56dbf212d879b62.jpg


We have also agreed to start on the aquascape today so I’ll try and upload pictures as that comes together.

On to the hurtle, and I knew there would be one. Last night at feeding, I noticed the new hippo tang covered in ich. Agh!!! A little back ground. The hippo was purchased with a muellers butterfly fish and have successfully gone through QT. They were hanging out in a 20 gallon observation tank while I moved the inhabitants of the 125 into two 40b tanks. That left me with 3 tanks to care for while I upgrade. After two weeks of observation, I was leaving for work and decided to move the hippo and butterfly into the 40bs to make things easier and more manageable for my fiancé. 4 days later, I spotted ich. Today I confirmed it is ich. Frustrating as I’ve been very diligent about QTing incoming fish. I haven’t been so diligent with coral and inverts and I’m thinking it was already in the aquarium. With everyone healthy and stress free it didn’t rear its ugly head u til the move. Ive started to elevate copper in both tanks in hopes to combat this with a 100% success rate. All fish are fat and eating aggressively so I think it’ll be fine.

Wish me luck!

-Paul
 
Working on the rock scape. Here’s what we’re thinking. Plan on extending that over hang and make it a little girthier with rubble rock later on. This isn’t final by any means just a general thought. Let us know what you think.

c8f913d25fa7f6fcdd9a845f920259b1.jpg


490095ba3b4ca923350cf7539f33cfe2.jpg
 
I like the scape, but wonder if you could get a little bit more dimension by adding a small (extra small even) island in the front of the bigger ones. Down low and not long/wide, might give you interesting cavern type looks and more spots for some of the more invasive corals you might want to keep.
 
I like the scape, but wonder if you could get a little bit more dimension by adding a small (extra small even) island in the front of the bigger ones. Down low and not long/wide, might give you interesting cavern type looks and more spots for some of the more invasive corals you might want to keep.

Good point. We are struggling a bit with a large over hang we want to create. I’ve thrown around the idea of attaching a 1/2” panel of glass along the back with some triangle brackets to create an over hang but I’m too afraid that it will let go. I do have some threaded nylon rods coming and a large masonry bit to see if there are other ways to create the look.
 
To update every one, fish are going through copper treatment as they have somehow contracted the Ich. We had one loss, the mueller butterfly, but I truly believe this is somewhat isolated and a reaction to the copper. I tried pulling him out and putting him into NSW but he didn’t make it.

I rinsed 160lbs of new dry sand and got started on running electric downstairs around the tank. Again, these are basically extensions chords from the APEX so I can keep the APEX further away from the sump and still retain control over the necessary equipment.

Sump is in place. The holes previously drilled will be plugged using bulkheads. The 2” hole is for the return pipe and the three 3/8 holes will accommodate float valves.
12ed60fed314e07f4e9da7679a0ae83f.jpg


A little background:
The fish room has two 20amp circuits. Treated, and labeled, as essential and non essential. The essential circuit is wired into my transfer box which can be powered by a 12.5kw generator. This way, should we lose power, the essential equipment will be powered. I’d like some input as to what you consider “essential” equipment.

In the pic above you see the 12/3 extension chord coming from upstairs and three 14g wires. The 12/3 extension chord will electrically power some non essential equipment upstairs (lights, MP40(2), MP10(2), iPad). The three 14g Wires act as an extension chord. They’ll will be plugged into the essential side of my APEX and will provide electric to the two gyres. The MP40s and 10s will be controlled by the APEX via the WXM module. Now, should the power go out, I have two back up batteries to keep those powered but extended power outages will eventually render these INOP. However, since the generator will power the essential circuit, I will have the APEX and therefore the gyres.

I hope I didn’t make that overly complicated

Anyway, here are some progress shots. The key is labeling EVERYTHING!
01c1db56535bd471843cdd9138a5adaf.jpg


29ec1226167ea1072ed9290bcb0b7807.jpg


d32048c5248ed329e363a80e70fb48e1.jpg


-Paul
 
I’m sorry to hear about the butterfly, that’s so unfortunate.

Loving the upgrades to the room- that electrical is the route I’m going too (if I can get time...) and it’ll look fantastic once done.
 
I’m sorry to hear about the butterfly, that’s so unfortunate.

Loving the upgrades to the room- that electrical is the route I’m going too (if I can get time...) and it’ll look fantastic once done.

Yea it’s a pain in the butt but I think well worth it. I’m trying to find a cabinet (thinking storage cabinet) or a rack even. Something low profile that doesn’t look like it belongs in the bathroom or kitchen. Pain in my ****! Any suggestions?
 
Lol, yeah. Me too. I have that thing archived to my desktop so I don’t have to waste time firing up a browser to view it...


Look great man.

Im currently switching out 165 gallons to get my nitrates way down...

af9dfa1b3ec45dddcd51de961784763a.jpg
2b6e7d8fb405f28272c8cd1239ce49eb.jpg
Currently working in IT, and seeing the picture of your printer worries me. Great build so far.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top