placed a gsp and torch, never opened up

  • Thread starter Thread starter wasi99
  • Start date Start date
  • Tagged users None

wasi99

Community Member
View Badges
Joined
Oct 29, 2019
Messages
34
Reaction score
3
What state or country do you live in
Canada
Rating - 0%
0   0   0
I have a newly cycled fluval 13.5 which was cycled, ran tests
ammonia was 0
nitrates and nitrites were 0 as well
salinity was 1.026
temp 78

placed a torch coral frag acclimated it via drip and temp placed in the tank to find it the next morning not opening up. the next day it was just the Skelton of the coral left same with the gsp it never opened up. I have introduced a small clownfish to the tank.
 
The lighting might be a problem too, I’m not sure how strong the Fluval stock light is.
 
I got them from a pretty reputable saltwater store in Calgary. the torch just gone the next morning
 
How long has your tank been up and cycled? And are you 100% sure that its fully cycled?
 
Something must be off with your water. Lck of lighting will not kill a torch over night. How long did you cycle the tank? what did you use to cycle it? live or dry rock? dry or live sand? are you using RODI or tap water? What are your actual water params?

SG
temp
ammonia
Nitrite
nitrate
phosphate
calcium
alkalinity
ph

The more info you can give us, the more help we can provide.
 
SG 1.026
temp 78
ammonia 0
Nitrite 0
nitrate 0
phosphate not too sure
calcium. Not too sure
alkalinity 9.6 via Hanna
ph 8.2
RODI
Live sand live rock
I used the live rock I have in my other reef tank so I didn’t cycle any live rock and use some bioballs from my already established aquarium
About a week that’s what my lfs said given my circumstances
 
Last edited:
The only thing that stands out to me is the complete lack of Nitrates. Nitrates are always present in my experience, and are necessary for success. The ONLY exception to this would be when using other export methods such as turf scrubbers, GFO, or a combination of the 2, whech when overdone can strip the system of ALL PO4 and NO3 causing problems.

Also, if the tank has only been setup for a week or two, it is likely to be quite unstable. Even with the use of live rock and sand, a week is not long enough for a new tank to balance itself out and be prepared for sensitive life. I would simply give things time to settle before adding anymore corals. Leave the clown, let it get comfortable for a few weeks. Watch your nitrates come up a bit with feedings, and try another coral in a few weeks.
 
great, thank you so much. I'll see how that goes.
 
I got them from a pretty reputable saltwater store in Calgary. the torch just gone the next morning
Do you have peppermint shrimp in the tank?
I’ve had a torch disappear due to those jerks before.
 
The only thing that stands out to me is the complete lack of Nitrates. Nitrates are always present in my experience, and are necessary for success. The ONLY exception to this would be when using other export methods such as turf scrubbers, GFO, or a combination of the 2, whech when overdone can strip the system of ALL PO4 and NO3 causing problems.

Also, if the tank has only been setup for a week or two, it is likely to be quite unstable. Even with the use of live rock and sand, a week is not long enough for a new tank to balance itself out and be prepared for sensitive life. I would simply give things time to settle before adding anymore corals. Leave the clown, let it get comfortable for a few weeks. Watch your nitrates come up a bit with feedings, and try another coral in a few weeks.

+1 Nitrates
 
only live creatures in the tank is the clown and a few hermits.
I'll probably just get the lfs to check my water tomorrow to be safe.
 
I've been testing my water daily. nitrates are still at 0 without any change, any way of dosing or any suggestions.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top