Please help drilling a hole in a filled reef..

[nanomania]

Can i drill a filled 130gallon 12mm glass aquarium by reducing water level?? As u can see in the photo, i want to drill a hole in the diy over flow iv built, and attach a sump. Is it possible???

 

[TheEngineer]

I’ll answer your question with a question...

If this goes wrong and the tank cracks are you OK with most of your 130g of water on your floor?

It isn’t a good idea. The extra stress of the water pressing out adds stress to what you’re doing. I’d add to that the likelihood of getting glass dust in the tank

 

[Jason mack]

I’ll answer your question with a question...

If this goes wrong and the tank cracks are you OK with most of your 130g of water on your floor?

It isn’t a good idea. The extra stress of the water pressing out adds stress to what you’re doing. I’d add to that the likelihood of getting glass dust in the tank

+1 for this ... dont do iT !!

 

[cracker]

Drilling horizontal would be difficult & take a long time . Can you use an HOB overflow maybe ?

 

[WoodRiverTroutBum]

It has already been said, but I would not even consider it. The chance of success in this scenario is minimal at best I would say.

 

[LadyMac]

I know it’s a lot of water; but why not just drain the tank and drill that way? You can place all rock sand and livestock in buckets and totes, drill, plumb and refill. Less risk to busting the tank that way.

 

[nanomania]

I guess ill go for an overflow box

 

[nanomania]

Which overflow box would be best??

 

[DSC reef]

There's a lot of choices for overflows. Pick one that fits your flow needs. Eshopps might be the easiest choice but I'm not sure on the "best".

 

[KMench]

I have an eshopps pf-800 and it works great. Initially I had too little flow through the sump and got bubbles in the top of the U-Tube. But ever since I picked up my flow rate with a new return pump it’s caused me 0 problems.

 

[nanomania]

I have an eshopps pf-800 and it works great. Initially I had too little flow through the sump and got bubbles in the top of the U-Tube. But ever since I picked up my flow rate with a new return pump it’s caused me 0 problems.

Iv used eshopps pf nano years ago.

 

[Crabs McJones]

Iv used eshopps pf nano years ago.

Before I drilled I used the pf300. No issues

 

[nanomania]

Which flowrate would be best for pf800? I have eheim 3000lph pump. Distance from sump to tank height is 55 inches.

 

[Robert Vacchiano]

Empty the tank and drill it. The over the back overflow will eventually fail it’s just a matter of when and if your home at the time to catch it from flooding your floor.You could lower water to an inch or so in tank and then drill it put in bulk head and refill

 

[nanomania]

Empty the tank and drill it. The over the back overflow will eventually fail it’s just a matter of when and if your home at the time to catch it from flooding your floor.You could lower water to an inch or so in tank and then drill it put in bulk head and refill

I have used esgopps pf nano for a year, never failed. Emptying tank till i drill is no issue for me.. have u done it?