- Joined
- Feb 23, 2015
- Messages
- 349
- Reaction score
- 50
I'm interested in hearing constructive feedback & advice. I will keep the description brief. Enjoy!
- 120g 4x2x2
- 40g breeder sump
- Aqueon 2000 heater
- x2 Kessil a360w LEDs
- Kessil Spectral Controller
- Mag 9.5 return pump
- Super Reef Octopus 2000 int
- Auto Top Off with 'fail safe' back up switch
- TwoLittleFishies Phosban 150 reactor running HC GFO
- TwoLittleFishies 150 running Activated Carbon
- MJ 900 pump for the two reactors
- Fluval 24" LED fugue light (from my old 30g)
- Maxspectre XF-150 gyre
- VorTech MP40wQD pump
- Electronic temp probe & Traditional secondary
- live sand mix of sugar fine, pink Caribbean, argonite (1-4" deep)
+-80-90lbs of reef saver rock
- chaeto algae ball in the fuge
- Thread x Thread bulkheads
- Unions on the drain and return
- 1.5" PVC plumbing
- Filtersock
- 2x6s make up the frame
- 3/4" plywood skin on top sides and back
- Air, Water & Ice 5 Stage RO/DI
I have two smaller power heads I will use if necessary but for now they are staying out.
- 120g 4x2x2
- 40g breeder sump
- Aqueon 2000 heater
- x2 Kessil a360w LEDs
- Kessil Spectral Controller
- Mag 9.5 return pump
- Super Reef Octopus 2000 int
- Auto Top Off with 'fail safe' back up switch
- TwoLittleFishies Phosban 150 reactor running HC GFO
- TwoLittleFishies 150 running Activated Carbon
- MJ 900 pump for the two reactors
- Fluval 24" LED fugue light (from my old 30g)
- Maxspectre XF-150 gyre
- VorTech MP40wQD pump
- Electronic temp probe & Traditional secondary
- live sand mix of sugar fine, pink Caribbean, argonite (1-4" deep)
+-80-90lbs of reef saver rock
- chaeto algae ball in the fuge
- Thread x Thread bulkheads
- Unions on the drain and return
- 1.5" PVC plumbing
- Filtersock
- 2x6s make up the frame
- 3/4" plywood skin on top sides and back
- Air, Water & Ice 5 Stage RO/DI
I have two smaller power heads I will use if necessary but for now they are staying out.



