Plumbing glass holes return.

[b4tn]

So my glass holes 1500 in and out came in today. I went ahead and added the little extra $$ to get a second 3/4" return spout and bulkhead with intentions of putting one return spout in each rear corner. I'm just curious what everyone else would do? Tee the line and use one pump for both returns? Only drill for 1 return and save the second for extra parts?

This will be going on a 75 gallon DT with a 20 gallon sump. I have not decided yet but I will be using a Sicce syncra silent 3.0 or a Sicce syncra silent 4.0 pump

 

[saltyphish]

I would T the return

 

[redfishbluefish]

Agree with the tee!

I tee'd off my return as well....but came up over the top of the tank and then tee'd to four loc-line sets. Here's a picture from the back of the tank:



And yes, that is a 1500 gph Glass-Holes overflow.

And here's a shot from the front of the tank:

 

[Breakthecycle2]

I have the bigger one with 2" drains and 1" returns. I just did the "T" for the returns with ball union valves on each.