Pod Hotel Directions

[D3DPrintedThingz]

Long Live The Pods - Pod Hotel - Apply Proper Print Settings Or You Will Waste Your Time Energy Money by D3DPT

listen to me and listen to me carefully. it is easy if you do exactly what I do. if you know more than I do , do it your way. that works better I am absolutely positive. 4 top layers 3 bottom layers 0 walls 15-20% infill and the MOST IMPORTANT IS GYROID INFILL . when you slice, hit preview, make...

www.thingiverse.com

What I do, you are encouraged to share what you do.

3 top layers 2 bottom layers 0 walls 15-20% infill GYROID

Make sure you preview and confirm what you will print looks like what you want. I’m willing to answer questions ! Scaleable to fit wherever it needs to go.

 

[tzabor10]

This should be in the market place

 

[D3DPrintedThingz]

This should be in the market place

no no nooooooooooo money. print them and trade them for cheap zoas

 

[exnisstech]

Will this float? Pod hotels I've seen float unless a weight is placed on them. I like rock rubble.
EDIT: not that this isn't cool it's just if it floats it's a hassle to use JMO

 

[D3DPrintedThingz]

Will this float? Pod hotels I've seen float unless a weight is placed on them. I like rock rubble.
EDIT: not that this isn't cool it's just if it floats it's a hassle to use JMO

if i print something, and put it in water and it floats i run it over with my car and keep trying until it sinks. they have all sank so far with these settings. if you have a turkey baster and blow into the "long live the pods" it will make the pods fly out of their safe homes.

 

[D3DPrintedThingz]

if i print something, and put it in water and it floats i run it over with my car and keep trying until it sinks. they have all sank so far with these settings. if you have a turkey baster and blow into the "long live the pods" it will make the pods fly out of their safe homes.

i also love rock robble - what i believe this do better than rock rubble is easier to move, clean, grab, not worry about vermitid snail going 7 mm into your finger, not that any of us have the problem. also you can use them to stand a skimmer on if they are wide enough. If you need a skimmer stand I would however point you in the frag table direction and repurpose one of those way easier and height adjustable

 

[Doctorgori]

Long Live The Pods - Pod Hotel - Apply Proper Print Settings Or You Will Waste Your Time Energy Money by D3DPT

listen to me and listen to me carefully. it is easy if you do exactly what I do. if you know more than I do , do it your way. that works better I am absolutely positive. 4 top layers 3 bottom layers 0 walls 15-20% infill and the MOST IMPORTANT IS GYROID INFILL . when you slice, hit preview, make...

www.thingiverse.com

What I do, you are encouraged to share what you do.

3 top layers 2 bottom layers 0 walls 15-20% infill GYROID

Make sure you preview and confirm what you will print looks like what you want. I’m willing to answer questions ! Scaleable to fit wherever it needs to go.

edited …

 

[D3DPrintedThingz]

edited …

i am sorry i dont know what you mean - did you edit it and make it better so i can download it and play around? i will get the hang of it pretty quickly I hope . lol...

 

[Doctorgori]

i am sorry i dont know what you mean - did you edit it and make it better so i can download it and play around? i will get the hang of it pretty quickly I hope . lol...

Ha ha, no I originally said: “I swore I saw those before at a “Adult Mart” (Or something like that)

… I edited/deleted because it’s sorta a family show and easily offended is the “in” thing …. just an off handed remark of no value to the thread

 

[D3DPrintedThingz]

Ha ha, no I originally said: “I swore I saw those before at a “Adult Mart” (Or something like that)

… I edited/deleted because it’s sorta a family show and easily offended is the “in” thing …. just an off handed remark of no value to the thread

lololllllllllllll i am slowly trying to back out as many of my comments i can find, so I will be "editeding" too for a bit. it happens almost subliminally sometimes so those i consider free of charge. Adult Mart sounds like they could have really made a name for themselves if they could have been a little bit more appropriate. Can you imagine the heathens that shopped at htat place

 

[Doctorgori]

lololllllllllllll i am slowly trying to back out as many of my comments i can find, so I will be "editeding" too for a bit. it happens almost subliminally sometimes so those i consider free of charge. Adult Mart sounds like they could have really made a name for themselves if they could have been a little bit more appropriate. Can you imagine the heathens that shopped at htat place

lol …. yeah I was only “Looking” in Adult Mart trying to spot the “real” weirdos . BTW a lot of that stuff in there has aquarium uses if you use your imagination

 

[D3DPrintedThingz]

lol …. yeah I was only “Looking” in Adult Mart trying to spot the “real” weirdos . BTW a lot of that stuff in there has aquarium uses if you use your imagination

heathens are aquarists i mean heathens and aquarists