Post your results
- Thread starter Keithcorals
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Any tap water use? Tap water can contain aluminum. The EPA secondary guidelines can allow up to 200 ug/L.
Any tap water use? Tap water can contain aluminum. The EPA secondary guidelines can allow up to 200 ug/L.
No, I use a 5 stage RO/DI. Filters are probably about 6 months old now, so I suppose they may be due to for a change soon. Although my TDS meter still reads zero.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
OK, thanks.
dirtdobber06
Active Member
We need someone good at statistics to design a spreadsheet where the data can be entered along with additives/salt mixes used to help determine if any patterns emerge. This might be more efficient than testing every possible additive. Is there anyone out there that can design such a spreadsheet or algorithm? Or are there simply too many variables?
swk
Well-Known Member
Here's a question for everybody:
Those of you with high amounts of heavy metals, are you running refugiums?
My test came out extremely clean and besides using the salt that I use and my water change schedule, the only thing that may differ is my fuge that is packed with caulerpa, chaeto and bryothamnion
Those of you with high amounts of heavy metals, are you running refugiums?
My test came out extremely clean and besides using the salt that I use and my water change schedule, the only thing that may differ is my fuge that is packed with caulerpa, chaeto and bryothamnion
Should I be concerned with my high lithium and Silicon? I see others with high tin as well.
I had a cfl bulb crack in my system 9 months ago. At this point I would assume that's all been flushed through the many WC and I replaced 90 pct of the rock and sand.
- 310 gallon system with fuge
- reef crystals salt
- seachem seagel and rox carbon in separate reactors.
- calcium reactor
I had a cfl bulb crack in my system 9 months ago. At this point I would assume that's all been flushed through the many WC and I replaced 90 pct of the rock and sand.
- 310 gallon system with fuge
- reef crystals salt
- seachem seagel and rox carbon in separate reactors.
- calcium reactor
Last edited:
dirtdobber06
Active Member
I also run reef crystals and my Bromine and Lithium are high. Boron is caution. My silicone is not and Sn is nomal. Wonder if reef crystals has high lithium and Bromine. Has anyone mixed up a batch of reef crystals and had it tested without it going into the tank?
I looked back and saw another IO user who had high lithium.
I can't believe I forgot to mention what I dose. I dose RS colors A,B,C and D. I dose their suggested daily amount , but only once a week on Sundays. I drew my water on Friday. The zero iron was shocking to me because on top of the iron I get from RS color, i also dose Randy's formula using fergon tablets.
Silicone is the one that has me the most curious. I don't think I've seen anyone with high silicone.
I can't believe I forgot to mention what I dose. I dose RS colors A,B,C and D. I dose their suggested daily amount , but only once a week on Sundays. I drew my water on Friday. The zero iron was shocking to me because on top of the iron I get from RS color, i also dose Randy's formula using fergon tablets.
Silicone is the one that has me the most curious. I don't think I've seen anyone with high silicone.
dgrigor02
Active Member
I had a full 50g bag of Instant Ocean fresh mix tested ( I did spike some element but didn't touch Bromine or Lithium ). Lithium results were 368mg/l, Bromine 95mg/l so yes both are a little high. Another interesting thing though did show some Copper 2.29mg/l where my 180g show test was 0.
You can in 2 more posts.
Just read a paper by Randy about silica which I'm assuming is where my silicone reading is coming from. I have almost no diatoms which you would expect with a high silica count. Must be my lack of iron, low phosphates and nitrate that is keeping them from exploding with that silica count.
Just read a paper by Randy about silica which I'm assuming is where my silicone reading is coming from. I have almost no diatoms which you would expect with a high silica count. Must be my lack of iron, low phosphates and nitrate that is keeping them from exploding with that silica count.
Last edited:
Shpongled
Active Member
Tank Size: 450 gallons
Salt: B-Ionic ESV
Additives: Acropower (8-10ml per day), B-Ionic Two part, B-Ionic Manesium (10-15ml a week), Brightwell Lugols (8 drops a week), Warner Marine potassium (20ml a week)
FoWC: 50 gallons once a week
I understand where the Lithium is coming from. Bromide is high. Also Molydenum is non-existent in my tank??
Salt: B-Ionic ESV
Additives: Acropower (8-10ml per day), B-Ionic Two part, B-Ionic Manesium (10-15ml a week), Brightwell Lugols (8 drops a week), Warner Marine potassium (20ml a week)
FoWC: 50 gallons once a week
I understand where the Lithium is coming from. Bromide is high. Also Molydenum is non-existent in my tank??
12g Nano AIO (no sump) - 6-1/2 years old
50/50 Reef Crystals/Instant Ocean <- for the last year...previously MicroLift)
15%/wk water change
No mechanical or chemical filter media (live rock & live sand only)
50/50 Reef Crystals/Instant Ocean <- for the last year...previously MicroLift)
15%/wk water change
No mechanical or chemical filter media (live rock & live sand only)
Last edited:
Okaaaay, 30 min to edit and it's locked 
Pages 1 & 2:
Additives: Kalwasser, Kent Concentrated Iodine (3-4 drops/week) and ESV B-Ionic Magnesium
Pages 1 & 2:
Additives: Kalwasser, Kent Concentrated Iodine (3-4 drops/week) and ESV B-Ionic Magnesium
Last edited:
I (aka a guy on my local board) think I figured out the source of my silicone and possibly the Al. I swapped out my live rock for a cerameco vidarock scape.
Anyone else with ceramic pieces in their tanks get tested?
Anyone else with ceramic pieces in their tanks get tested?
