Pretty sure this is a big problem!!!!

[Mom.VS.Reef]

Help. How can I fix this?
silicone, glue?

this is on my wave makers so 100% submerged.

 

[i cant think]

Help. How can I fix this?
silicone, glue?

this is on my wave makers so 100% submerged.

I’d recommend chemical safe/reef safe silicon. Glue will most likely fail in the long term

 

[Tamberav]

I had this happen to an older maxspect gyre. The cords are very wimpy vs my Tunzes. I stopped using the gyre. Looks like your jeabo version suffers from the same problem.

 

[Mom.VS.Reef]

I had this happen to an older maxspect gyre. The cords are very wimpy vs my Tunzes. I stopped using the gyre. Looks like your jeabo version suffers from the same problem.

Yep it sure is.
suggestions?

 

[vtecintegra]

Same thing happened to one of my maxspect. I trashed it. If I were going to try to save it I'd use a two part epoxy.

 

[Wyvern]

Liquid marine epoxy, mix it up good, let it get slightly cured, put it in the hole and shove the cable in, keep held there for a few minutes, once set use more epoxy around it to make sure its sealed. Let cure overnight.

 

[Mom.VS.Reef]

Liquid marine epoxy, mix it up good, let it get slightly cured, put it in the hole and shove the cable in, keep held there for a few minutes, once set use more epoxy around it to make sure its sealed. Let cure overnight.

Thank you!