Michael Gray
Valuable Member
Now that I have t5. I have room on back of tank. Can I get another 4 fan breeze 3. And get like a y connector to run both off the same 1-10v variable controller??? Instead of using another 1-10. Well my last 1-10v.
Propeller breeze 3
- Thread starter Michael Gray
- Start date
- Tagged users None
- Joined
- Jul 27, 2016
- Messages
- 1,201
- Reaction score
- 1,545
The power supplies that come with the breeze fans are all the same, regardless of fan size. The largest fan the PSU can run is the 6-fan unit. Knowing that, you can technically use a splitter cable to power a total of 6-fans (2x 3-fan units). That will give you the same control over those fans through the same fan controller.
Running 8 fans would be a no-go since the PSU would not provide enough power to run the fans at 100%.
Running 8 fans would be a no-go since the PSU would not provide enough power to run the fans at 100%.
OP
OP
Michael Gray
Valuable Member
Oh ok. Is there a way to find out on the 6 fan model what the distance is from.end to end of the mount clips. Trying to see if it will squeeze in-between my old light mounts @Vinny@GHLUSA
- Joined
- Jul 27, 2016
- Messages
- 1,201
- Reaction score
- 1,545
The mounting feet are about 1" x 1".
The spacing in-between the feet on a 6-fan is about 18".
The spacing in-between the feet on a 6-fan is about 18".
