05grandprix
Active Member
im changing my pumps from 2 korallia 750 and 2 jebao rw-8 on a 93 cube to 2-3 mp40s if I run 2 is that enough and if so how should settings be. My return is a mag drive 7 running little over 30% open
Question about flow
- Thread starter 05grandprix
- Start date
- Tagged users None
.AcroKiller.
2500 Club Member
2 mp40s are plenty for a 93 cube
fishdoc11
It's a hobby
Agree, that's plenty.
bknapp
Has been left unattended
Having just ran that same sized tank with two MP40QD that plenty of flow, too much actually. I couldn't run them over 65%, if you're BB you could run them higher.
As far as which program to use on the Vortechs the Reef Crest and Tidal Swell modes are probably the most popular.
As far as which program to use on the Vortechs the Reef Crest and Tidal Swell modes are probably the most popular.
Brian Treadwell
Active Member
I just bought a WP25 for my 90 ga. It has not arrived yet but will that be enough flow for a 90 mixed
bknapp
Has been left unattended
I wouldn't think so.
Brian Treadwell
Active Member
Ok Thanks , I have a couple of older little fans maybe I should put at the other end.
Brian Treadwell
Active Member
Hey everyone , I am new here not sure where to post a question , but I need a little help. I have lost my first inhabitant today my bubble coral , it was in the tank when purchased , purchased an already established 90 ga. Broke it down and moved it about 80 miles to its new location , I save at least 85% of the water , all of the substrate , live rock , but I did change the wet/dry system and bio balls to a sump with refugium. I am running one Marine programable LED light and a Fluval Led one at 11 hours a day and the other 8 hours a day. SG steady at 1.024 temp. Steady at 78.2 to 78.5 , I have nitrates jump to 20ppm and Ammonia went to .05 once PH 8.3 , calcium 460 v Alk. 180. And this is what my bubble looked like when I got home
The first pics is before the second is today
The first pics is before the second is today
Brian Treadwell
Active Member
WP25 arrived installed on else mode which is a random flow placed my other 1250 fan other end of tank flow is greatly increased , the WP25 puts out a lot of flow for being small.
