Question about replacing the sump on a Red Sea Reefer 170

esloan88

Community Member
View Badges
Joined
Mar 30, 2017
Messages
69
Reaction score
5
What state or country do you live in
Texas
Rating - 0%
0   0   0
Looking at picking up a barely used Red Sea Reefer 170. Comes with all the standard stuff normally included with the RSR 170 plus a BM T01 doser and AI HD26. Looks like a real good package for a good price but I think I want to replace the sump. I know the stock sump does not have a refugium and I would like to have one.

I have a Trigger Systems Crystal 18 Cube sump that I had used in our old tank and I am wondering how well this would fit in the cabinet and what modifications I would need to do with plumbing and such? The sump is 18″ long x 18″ wide x 15″ high and the drain chamber is in the back left hand side. Here is the sump: http://www.triggersys.com/ts/crys18c/

Thanks in advance for any replies!
 
So just measured my 170 cabinet.

Bottom of cabinet measures - 20" x 17.5" (although there's room in bottom of cabinet to put a board on the floor extending that out to 18.25") - due to way door is constructed there's clearance. I can send pics if you want to verify that.

So, it'll fit but you'll have 1/2 inch overhang on bottom. Your either fine with that or you'll want to put a board on the floor of cabinet.

Plumbing shouldn't be an issue, you'll just need to cut and replace as needed to route drain/overflow correctly.
 
Looking at picking up a barely used Red Sea Reefer 170. Comes with all the standard stuff normally included with the RSR 170 plus a BM T01 doser and AI HD26. Looks like a real good package for a good price but I think I want to replace the sump. I know the stock sump does not have a refugium and I would like to have one.

I have a Trigger Systems Crystal 18 Cube sump that I had used in our old tank and I am wondering how well this would fit in the cabinet and what modifications I would need to do with plumbing and such? The sump is 18″ long x 18″ wide x 15″ high and the drain chamber is in the back left hand side. Here is the sump: http://www.triggersys.com/ts/crys18c/

Thanks in advance for any replies!

Interested as well. I have a Reefer 250 and am interested in moving to a larger sump but want to find one that isn't going to require a ton of modification to the plumbing.
 
Personally, and this is just my advice so feel free to ignore it, when I was looking at which system to buy, I had to decide before hand if I wanted a refugium or not. The RSR170 (can't speak to 250 but I believe similar) are just not setup for adequate sized refugium.

The smaller RSRs are great if you want simple hardware based nutrient control out of the box. Put a skimmer in there and maybe drop a bag of GAC in the cup/sock and you're off and running. I also carbon dose, but set that aside.

If I already had a RSR and wanted to have a refugium, I would definitely consider modifying (and there are some sweet mods out there). If I was looking to buy new system and know I wanted a fuge, I would go with system that had bigger sump and was more easily modifiable with better results.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top