Question for those with Kessil - Gooseneck

[TheZoelander]

Currently going through the process of ordering a custom tank, and have a quick question for those who have the Kessil Gooseneck ( A360W ). From what I seen on my search has been alot of mounting on tanks that are rimless or with the regular black plastic trim ( gooseneck extending straight up and over ). Will this bracket be able to be mounted on the eurobrace, which would require the gooseneck from being attached to a different side of the bracket. My question would be: is there an alternate way of attaching the gooseneck to the bracket than they way it is advertised. Hope this makes sense. Thanks in advance.

 

[Jimbo662]

The goose neck wouldn't work on a eurobrace. If you did attach it the goose nech isn't flexible enough to be able to bend straight up and over the tank. You may be able to custom make an L connection that would screw into the bracket and then screw the goose neck to it.

 

[reeffirstaid]

It may work, if you got the Kessil 90 degree adapter. You could bend the goose-neck up allowing the light to hang 90 degrees down.

Nevermind, no I don't think that will work, even with the adapter.

 

[TheZoelander]

I'm assuming that the gooseneck section screws into the bracket, if thats the case I should just be able to drill a new hole and tap it. I really just need to find a close up of the bracket, or see this piece in person If anybody could post a close up of the bracket / gooseneck connection that would be awesome.

 

[HiddenUser]

The gooseneck can be mounted to a Eurobraced aquarium without any issues. The bracket works for rimmed, rimless, and eurobracing. I just picked up a Kessil A360W-E with a Gooseneck and can confirm this as well.

Further proof - Skip to 2:20 - https://www.youtube.com/watch?v=vjVWKsFARRs

 

[TheZoelander]

The gooseneck can be mounted to a Eurobraced aquarium without any issues. The bracket works for rimmed, rimless, and eurobracing. I just picked up a Kessil A360W-E with a Gooseneck and can confirm this as well.

Further proof - Skip to 2:20 - https://www.youtube.com/watch?v=vjVWKsFARRs

Perfect, thanks that answers my question, Thanks for everyones input, appreciate it.

 

[Jimbo662]

Sorry, my bad...I now see the additional hole to screw the gooseneck into. See, you learn something new every day!

 

[Bestshooter]

Has anyone done the gooseneck on a eurobrace ? Any problems with weight or bending ? I’m thinking of doing it but want to make sure it holds .