Rainbow monti vs. Orange Passion and Homewrecker

KK's Reef

Valuable Member
View Badges
Joined
Apr 13, 2021
Messages
1,229
Reaction score
1,227
Location
94589
Rating - 0%
0   0   0
I have an SC Orange Passion and JF Homewrecker frags glued on top of a rock. That same rock has a rainbow monti encrusting on it. When the monti meets these tenuis, who wins?

I've seen LFS display tanks where a bubblegum digi encrusted over an acro, so I'm wondering if the montis' sting is that strong.
 
Montis likely to win. Id keep it at bay away from the acros with a razor blade or scalpel.
 
Montis likely to win. Id keep it at bay away from the acros with a razor blade or scalpel.

lol I was afraid someone might say that. Other than scraping it off, are there any other methods for killing off the monti?
 
Is the rock removable? I have killer caps before by removing the rock and take a small torch and burn it. Works really well as long as it isn’t close to other corals. Another method I’ve use is make up a kalk paste and squirt it onto the monti and let it set. Kills the monti , but might take several applications to get all of it. Rarely will you get 100% coverage on the first application
Jeff
 
Is the rock removable? I have killer caps before by removing the rock and take a small torch and burn it. Works really well as long as it isn’t close to other corals. Another method I’ve use is make up a kalk paste and squirt it onto the monti and let it set. Kills the monti , but might take several applications to get all of it. Rarely will you get 100% coverage on the first application
Jeff

It is removable so that's the good part. I don't have a blowtorch, but wondering if the electronic zapper for aptasia will work.

The kalk paste is an option. Do you have a recipe? Will the paste mess with the water chemistry?

How do you guys feel about covering the monti with a reef epoxy?
 
I've used reef safe epoxy before, using a long strip of it to create a barrier around the monti and acro. I didn't cover it, basically just outlining it. Then after it grows onto the epoxy you can easily pop off the epoxy with the coral and repeat. You can try that.
 
I use f aptasia to knock back montipora every so often.

Did a bit of research on F Aptasia. I like how it cakes on hard and can be left on. Do you normally leave it on, or do you flake it away. How long do you leave it on to knock back your montis?
 
I have an SC Orange Passion and JF Homewrecker frags glued on top of a rock. That same rock has a rainbow monti encrusting on it. When the monti meets these tenuis, who wins?

I've seen LFS display tanks where a bubblegum digi encrusted over an acro, so I'm wondering if the montis' sting is that strong.
Not sure if it's the sting as much as the speed of growth.
 
I've used reef safe epoxy before, using a long strip of it to create a barrier around the monti and acro. I didn't cover it, basically just outlining it. Then after it grows onto the epoxy you can easily pop off the epoxy with the coral and repeat. You can try that.
I was going to say either this or super gluing over the edge of the monti. It'll eventually grow over the glue but it'll slow down the progress...
 
Not sure if it's the sting as much as the speed of growth.

Agree. I've had a stylo fall over on the rainbow a few months back and killed off the tissue on the monti where they touched. I think maybe the tenuis would be fine as well. The acro frags are more valuable, obviously, so I didn't want to take the chance.

I like your glue idea, but I think I'm going to go with the F Aptasia recommendation. I'd prefer to knock it back a lot and kill off its perimeter rather than just slow it down.
 
Did a bit of research on F Aptasia. I like how it cakes on hard and can be left on. Do you normally leave it on, or do you flake it away. How long do you leave it on to knock back your montis?
You can leave it on or I’ll take a small rubber tube and siphon it out when doing a waterchange Couple days is plenty of time.
Only downside is f aptasia is expensive
 
I wonder if you could use a laser to more precisely kill the montipora? Laser pointers that can burn are readily available now…I’d get a set of safety goggles (set for the laser wavelength) and give it a shot.
 
Or without killing it, surround it with frag plugs then as it covers the plug, pop it off and trade in to your LFS or give to local reefers
 
I wonder if you could use a laser to more precisely kill the montipora? Laser pointers that can burn are readily available now…I’d get a set of safety goggles (set for the laser wavelength) and give it a shot.
Dr Evil Laser GIF
 
Or without killing it, surround it with frag plugs then as it covers the plug, pop it off and trade in to your LFS or give to local reefers

Already done it. I've popped off the original frag plug and gave it away as a freebie. What's left is the part that's encrusted and spreading out. I don't want to kill it and I won't. I just want to knock it back a lot and recover some real estate. I'm sure it'll spread out again just fine.
 
It is removable so that's the good part. I don't have a blowtorch, but wondering if the electronic zapper for aptasia will work.

The kalk paste is an option. Do you have a recipe? Will the paste mess with the water chemistry?

How do you guys feel about covering the monti with a reef epoxy?
You can get pickling lime at most grocery stores. Mix it up with some water and allly it with one of the test syringes we all have laying around. Such a small amount it shouldn’t affect any ph or alk. Just cover the area you want dead and it will be dead!
Jeff
 
A guy I know puts some kalk on monticaps which kills the tissue then he’ll put acropora frags right on the dead spot and it’ll grow and start taking over the monti. Pretty cool
 
I've had success gluing small pieces of rock rubble around the edges and popping them off as the monti grows over. Great way to make frags without ugly round frag plugs
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top