Ranco ETC 111000 questions.

[West1]

I need to upgrade my inkbird and I’d like to go w/Ranco.

In searching for the diy Ranco, I don’t see where the etc 111000 is a dual controller?

this is the one I’m looking to purchase.
RANCO ETC-111000 Digital Cold Temperature Control New
Is it dual based on the outlet I add?

found this write up, is this the correct way to wire?

How To: Ranco Two Stage ETC Wiring Instructions

Last night I arrived to find that my just delivered Ranco two stage (dual) Temperature Controller didn't come pre-wired. I did extensive searching and didn't find any tutorials in the HBT forums. I am not taking credit for creating this tutorial, just adding here for our wealth of information...

www.homebrewtalk.com

I’ll be using 16g jumpers and is there a specific ga I should use on the splitter?

thinking of this one
Cablelera Power Cord Extension and Splitter, NEMA 5-15P to NEMA 5-15R x 2, 16 AWG, 13A, 125V (ZWACPQAG-14)

 

[DCR]

Do you want it to control heating and cooling or just heating? The 211000 is the dual stage version which allows you to have two separate outputs with two different setpoints. If you just want it to drive two heaters with the same setpoint and output, then the 111000 with the splitter cable with you reference should work, or any power strip.

 

[West1]

Do you want it to control heating and cooling or just heating? The 211000 is the dual stage version which allows you to have two separate outputs with two different setpoints. If you just want it to drive two heaters with the same setpoint and output, then the 111000 with the splitter cable with you reference should work, or any power strip.

Not looking for cooling, my AC does the cooling just fine . Heating is all I need.

 

[C_AWOL]

Ranco ETC-141000-000 NEMA 4X Prewired Temperature Controller

Ranco ETC 141000-000 NEMA 4X Prewired With 10' 16 Gauge Cord and an 8' Output Cord Including Water Tight Connectors Where You can Plug in Your Heater, Fan, or Other Device.

www.rancoetc.com

Ive always bought mine here and theyre prewired for you. Keep in mind you should get the probe covered to protect it from damage.
Or if you dont mind paying more brs has the rebranded one with a titanium probe