Rapidly breathing and discoloured fishes

Breadbox

Active Member
View Badges
Joined
Dec 20, 2021
Messages
110
Reaction score
32
Location
No way
What state or country do you live in
Other International
Rating - 0%
0   0   0
I'm not sure what's going on here, my azure damsel is breathing rapidly and constantly wobbling, my coral beauty is pale and constantly in hiding. My midas blenny is hiding in the shell and not coming out.
My newly added gramma seem to be extremely ill, fin clamped, hiding under a rock and when it emerge out of hiding, it only comes out to grasp at the water surface.

My clowns are acting as normal as ever.
Everyone except for the newly added gramma is acting completely normally(active and swimming about) yesterday night which is in hiding.

The only thing I did last night is add some prazi? I did not notice any sort of white spots on their body yet they seem to be on the verge of dying/suffocation. I do not believe ammonia is the issue as I just did a water change yesterday.

Please help, I really do not want to lose any more fish. 54856A1E-312E-482A-8C1F-2ACF3E759D5E.jpeg
 

Attachments

  • IMG_0883.MOV
    4.3 MB
  • IMG_0882.MOV
    12.5 MB
  • IMG_0884.MOV
    18.9 MB
  • IMG_0880.MOV
    6.8 MB
Can’t open videos on my phone
Test ammonia and nitrate
What test kits are you using?
 
I think I need to explain the newly added gramma alittle more, ever since he's added like 2 days ago, the damsel have being behaving a bit off, I'm not sure if he's a disease carrier but the all the trouble seem to begin after he's added.
 
Can’t open videos on my phone
Test ammonia and nitrate
What test kits are you using?
API is currently giving me 0-0.25ppm of ammonia, my seachem ammonia alert badge is yellow, the tank has being cycled for weeks now and I just did a water change 2 days ago.

How likely are the chances of velvet infection without any visible symptoms? Seeing how suddenly this happened.
 
I would start a couple of large water changes and get a better ammonia test. Do like 30% WC and retest. What your describing makes me think you may have exceeded your bacterias ability to convert to N03. About how old is the tank? How did you stock it? What caused you to add Prazi last night?
 
API is currently giving me 0-0.25ppm of ammonia, my seachem ammonia alert badge is yellow, the tank has being cycled for weeks now and I just did a water change 2 days ago.

How likely are the chances of velvet infection without any visible symptoms? Seeing how suddenly this happened.

I'm thinking this is velvet. Prazi can strip oxygen from the water and cause rapid breathing, but I see good aeration in the tank. Velvet's first symptoms are rapid breathing, not feeding and lethargy, plus sometimes hovering in water flow. Spots may not be seen at all, or may only be seen later on.

Presuming your water quality is fine, I think you need to presume this is velvet. The trouble is that once the fish show severe symptoms like this, they only have a few days to live, and the standard treatment for velvet, copper can take up to three days to work.

In this case, I think I would opt for Cupramine, and get the dose up to 0.50 ppm in 12 hours. You'll need a good copper test kit though. If that isn't an option, then Coppersafe, added according to the label instructions for the exact volume of your tank would be the next best thing to do.

I'm not seeing any invertebrates in the tank, but in case there are some, they won't survive copper.


Jay
 
I would start a couple of large water changes and get a better ammonia test. Do like 30% WC and retest. What your describing makes me think you may have exceeded your bacterias ability to convert to N03. About how old is the tank? How did you stock it? What caused you to add Prazi last night?
It's a 15 gal quarantine tank where all my fishes stay as my display tank fallows, I have around 6 fishes in there. I know it's overstocked but I made sure to do water change as much as possible and they have being together in there for one and half month without any issue until today.
I've added various medicine to the tank before without issue so I'm mot sure what changed, could it be toxic reaction between the different meds?
I added metroplex, paraguard and then prazi a few days apart without completely changing out the water.

I added parzi as I just added a new fish(gramma).
i find it abit hard to believe its ammonia as I did a 50% water change 2 days ago.
 
I'm thinking this is velvet. Prazi can strip oxygen from the water and cause rapid breathing, but I see good aeration in the tank. Velvet's first symptoms are rapid breathing, not feeding and lethargy, plus sometimes hovering in water flow. Spots may not be seen at all, or may only be seen later on.

Presuming your water quality is fine, I think you need to presume this is velvet. The trouble is that once the fish show severe symptoms like this, they only have a few days to live, and the standard treatment for velvet, copper can take up to three days to work.

In this case, I think I would opt for Cupramine, and get the dose up to 0.50 ppm in 12 hours. You'll need a good copper test kit though. If that isn't an option, then Coppersafe, added according to the label instructions for the exact volume of your tank would be the next best thing to do.

I'm not seeing any invertebrates in the tank, but in case there are some, they won't survive copper.


Jay
Would putting in an extra air-stone help? How quickly should I ramp up the level of coppersafe?
Is there anything I can do to delay this? Freshwater dip, lower salinity?
Sorry for so many questions, I did not expect things to get this bad so wuickly☹️
 
Follow Jay's directions. He is an expert. My guess is that when you added the gramma, you added the disease. You can get a handle on it though, just begin asap. Never hurts to add air stones. Especially with meds that zap o2.
 
Velvet can start ubse
API is currently giving me 0-0.25ppm of ammonia, my seachem ammonia alert badge is yellow, the tank has being cycled for weeks now and I just did a water change 2 days ago.

How likely are the chances of velvet infection without any visible symptoms? Seeing how suddenly this happened.
Velvet can start unseen but then looks like the solar system on-a fish
Api and badges notorious for false test readings and levels are likely higher than indicated
 
E3EF98D6-4600-4AB4-93F2-9AE6CFC389C4.jpeg

Dead in less than 3 days, I can't believe it. It can still wiggle but I don't think there's recovering from that unless there's a miracle.
;(
 
Would putting in an extra air-stone help? How quickly should I ramp up the level of coppersafe?
Is there anything I can do to delay this? Freshwater dip, lower salinity?
Sorry for so many questions, I did not expect things to get this bad so wuickly☹️
If you have a copper test kit, you should add half the calculated amount of Coppersafe, let it mix, then test. If you are at half level, add the second half of the dose. Without a test kit, you just add the calculated amount and cross your fingers.

You need to be careful in calculating the tank volume:


Tank volume calculations

For a rectangular aquarium: Length x width x height (in inches) divided by 231 will give you the base gallon capacity of the tank.

To refine this base capacity:

Measure the inside of the tank from the average surface of the gravel to the waterline for the height measurement described above. Then calculate the volume of your gravel bed. To do this, multiply the depth of the gravel by the width and length of the aquarium. Divide this by 231. Finally, divide this result by 3. This will give an approximate volume of the water contained between the grains of gravel in your filter bed. Add this value to your base gallon capacity.

Next, you need to subtract water displaced by any tank decorations, live rock, etc. There is no easy way to do this. For a standard "fish aquarium" decorated with a few pieces of coral, the amount to be subtracted is typically around 15% of the total calculated volume.

Finally, use the same method to calculate the volume of water held in the sump, if applicable, and add it to the running total.

Of course, the best way to determine the volume of a given tank is to determine the number of gallons it takes to fill it for the first time. Small aquariums can be filled with a vessel of known volume. Larger public aquarium exhibits typically need to be filled using a metered flow.


Jay
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top