Red Sea Max: A beginner's step into a whole new world!

  • Thread starter Thread starter netpez
  • Start date Start date
  • Tagged users None

netpez

New Member
View Badges
Joined
Jul 29, 2012
Messages
9
Reaction score
0
Location
Leesburg, VA
Rating - 0%
0   0   0
Hi all!


I am new to the community and last night was the start of our (my wife Huly just joined as well) Reef Aquarium adventure!


A couple weeks ago, we were privileged to be able to get our hands on a Red Sea Max 250 (65 gal). We figured the all in one setup would be good for rookies to the saltwater game and allow us a little leniency in our inexperience. We have been talking to a million folks and reading articles, blogs, forums and books. The only downside to that of course is that everyone has their own way of doing things (frustrating for someone looking for straight answers).


I setup the stand and the main tank along with the hood. While the systems itself is very cool and sleek looking, their instructions could use a bit more details and diagrams for those of us that are rookies with this equipment and don't fully understand their relationships (a youtube vide of a tank setup would be even better). Frustrations arose (specifically around the installation of the skimmer), and I cursed red sea max several times, but in the end, I got it done.


My wife and I are from Leesburg, VA, and we found a jewel of a place in Catharpin, VA called Blue Ribbon Koi (apparently well known on here) who were extremely knowledgaeble and were great folks to talk to about my setup. Given that we were initially setting up the system and I wanted 40 lbs+ of live rock, we took a trip up to That Fish Place in Lancaster, PA (yeah about a 2.5 hour drive) where we were able to pick up about 40 lbs of live rock and about 30 lbs of dead rock (some really cool pieces) for about 300 bucks (they have a big summer discount going on).


I already had some sand (2x40lb bags of CaribSea Ocean Direct Live Sand + 5 lb bag) from the guy I got the aquarium from. We ran out to Marine Scene for a buttload of 5 gallon tanks of RO/DI saltwater and some RO/DI freshwater (for top offs and other necessities). I thoroughly hosed down the dead rock till it ran clear and stacked the dead rock at the base and the live rock on top (girl at that fish place said no need for rinsing the rock as the stuff that comes off helps with the cycling of the tank. I hope that by stacking the live on top, that it seeds the rock below it. In the process of the stacking I made sure to create lots of caves and swim throughs so that my fish have a big playground! I took the hose again and thoroughly rinsed my live sand for about 10 min per batch making sure that I was scooping through all the sand and hopefully getting rid of all the dust and any fine particles or whatever else should not be in there.


We put the sand in the tank making sure to spread it fairly evenly throughout the tank and all around the rocks. I then started process of filling the tank with the saltwater.... this thing takes a lot of water! The proceses of filling the tank of course swirled the water (though I was spilling the water on the rocks trying to avoid direct pouring on the sand). after all was said and done we had...... a nice milky tank! LOL... Where did our rocks go?


The tank cleared significantly after about 6 hours, so I kicked off the pump leading through the filtration section and the pump that leads through the heating section of the tank. I did not turn the skimmer on, becuase I figure there is no protein to process and I did not turn the heater on because the water was already around 80 degrees (still is after about 12-14 hours).


The tank has really cleared up and the pumps seem to be doing their jobs. One thing that I did not mention, is that while I did keep the carbon bag in the red sea max filtration system (after rinsing of course), I replaced the contents of the biological bag (some sort of chalky white cylindrical objects) with a bunch of little chunks of live rock with a larger piece sitting on top of that bag. This has been recommended by a few folks I have talked to. As of now, the tank has been running with the filtration pumps since about 4:00am this morning (was up due to a long night of work). The tank looks good and I performed my first set of tests.. I also took some water in to a LFS to confirm my scores.


Here is what I got from my Coralife Deep Six Hydrometer:
Specific Gravity/Salinity PPT: 1.025 to 1.026/34


Here is what I got from my API Saltwater Master Test Kit:
Ammonia: 0 to 0.25
Ph: 7.9
nitrite: 2.0
nitrate: 20


Here is what my LFS got from using API 5 in 1 Aquarium Test Strips:
Ph: 7 (way off from what I got)
nitrite (NO2): 0
nitrate (NO3): 20
General Hardness (GH): 60
Carbonate Hardness (KH): 80


I am going to compile a list of questions and concerns I have in my next post, but for right now, here are some pics of the tank:

rsm_view_1.jpg

rsm_view_2.jpg
rsm_view_3.jpg

rsm_view_4.jpg

rsm_view_5.jpg
 
Issue 1 - Test Kits

I find it odd that I saw such a different reading on the ph level as my LFS. The reading of 7 vs 7.9 is major. As mentioned I used the API Saltwater Master Test Kit (using drops) while my LFS used the API 5 in 1 test strip. Is there a difference in reliability? Should I use the strips? Also my kit tests ammonia while the strips do not. The strips test General and Carbonate hardness while mine does not. I could use some recommendations on what I should be testing, and what are the best things to test with.


Issue 2 - Ph

From the previous issue, my LFS said the Ph is quite low. They recommended using marine buffer, but I am not sure if I should wait on that. From what I understand, the sand and the rock increase and stabilize Ph (is this accurate?) and since I just added my RO/DI stripped saltwater last night , that could explain the low ph and the PH could rise over the time of the cycle. Also, should I be changing anything since my cycle just started last night?


Issue 3 - The Cycle

I have heard from multiple people that some folks throw dead shrimp in their tank to kickstart the ammonia levels in their tank. As I understand it, the ammonia breaks down into nitrates and nitrites which feed bacteria (is this accurate?) My LFS guy said he never heard of that and that the live rock I got should shed and start its own ammonia cycle and he recommends against the shrimp. I have been hearing that the cycle of ammonia > nitrite/nitrates > bacteria > zero ammonia would be 2 weeks, some say 4, some say 6. What is the general consensus here?

I have also heard of people performing multiple cycles to build up more bacteria/maintaining bacteria. The explanation being that once the bacteria eats all the nitrates/nitrites, if it is all gone they die since there is nothing to eat, so once the ammonia levels go down to minimal, he throws more shrimp in and kickstarts the cycle all over again. Can anyone comment on the validity of the bacteria dying off if the ammonia is gone? Is there a cycle guideline that covers every intricate detail?


Issue 4 - Start Up Product

The LFS that provided our saltwater said that since half of our rock is dead rock, we should use something called "Start Up" from a company called Prodibio. Here is the description:

START UP together in the same package STOP AMMO START and START Biodigest. It allows to quickly start the biological filtration of aquarium and then introduce a few hours after the first fish.
START UP NANO may be also used to treat a nitrite peak.
START STOP AMMO is a product based on extracts of specific plants whose main property is to trap the nitrogen from ammonia. Biodigest START is composed of bacterial natural nitrifying, denitrifying and optional selected for their ability to quickly initiate the nitrogen cycle and thus to transform the ammonia into nitrites, nitrates and nitrites into nitrate nitrogen.
START UP allows you to rapidly introduce third of your toughest fish in your aquarium (after 4 hours in fresh water after 12 hours in seawater).

This seems counter-productive to the natural cycle process correct? Should I use this product? What are the advantages vs disadvantages?


Issue 5 - Aiptasia

I was told that if you get live rock you will probably get aiptasia no matter where you get it. Now one of the tricks I heard was getting Peppermint Shrimp which love aiptasia, but my LFS guy said that sure it does, but once it is done with the aiptasia it will go after my coral. That is the last thing I want! I have heard of injections you can use, but I don't think I am experienced enough for that. I also heard other methods which involve taking the rock out, but I have that stuff in there exactly as I want it, and I really don't want to take it out. Does anyone know of an easy method to get rid of the stuff before it comes time to add my corals?


Issues 6 - Water temp

At this point in time, our water temp is 80 degrees. Our house ranges from 73-76 degrees. At the time I added the water, I did not have a thermometer, so I was not able to read the temp then. How long will a 65 gallon tank adjust to the ambient temperature in a room? There is no direct sunlight on the aquarium (there is ambient light from a well lit room - lots of windows - again no direct sunlight).


Issue 7 - Red Sea Max

I was wondering if anyone here has experience with a red sea max (I have the 250). I was wondering what issues people may have come across and how they resolved them. I am also interested in tweaks people have made to the system as an example I have heard of people adding chillers, powerheads, phosphate reactors, UV filters, etc. Any input into this system and its shortfalls would be greatly appreciated!


Issue 8 - The good stuff!

After the cylce is complete, what are the recommendations on what to add to the system at the beginning. I have heard of snails and hermit crabs to get rid of the crap that will grow during the cycling period. Anyone have recommendations on which ones? Also how long till I can add corals and fish? should fish come first, or corals? Any input is appreciated!


I think that is it for my questions, but any other tips and tricks for a beginner would be awesome!

Thanks all !!
Pez
 
Welcome to reef2reef and congratulations on the new tank purchase! I also am a RSM 250 owner. Checkout my tank here https://www.reef2reef.com/forums/member-tanks/79442-klrs-red-sea-max-250-66gal.html .

I had a rough start with my RSM but things turned for the better in time.

Here are some problems I have came across in my experience with this tank.

1.Flow
-You will need to add extra powerheads to the tank because the two stock pumps will not offer enough flow to keep debris from settling on your rocks and corals in the future.

2.Skimmer
-The stock skimmer works. But it does not work well in my experience, unless they upgraded since my tank purchase.
-If not you will want to upgrade
--I just purchased this skimmer and the results are excellent so far Nano Reef Systems - the most efficient nano skimmers in the world!

3.Heat
-The mechanics of the tank + the juxtaposition of the lighting to the surface of the water made my temperature vary from 79-80 in the winter to 80-86 in the summer.
-These swings caused several fatalities and damaged other corals that they did not kill
-So I purchased a chiller-Artica 1/10hp

4.Heater
-If the heater is still the glass one
-I read a few events where the stock heaters burst and electrocuted the tank
-However, this is not a very likely occurrence but I am paranoid of these things when it comes to tanks
-I switched to a plastic, shatter proof heater

These are the only 4 issues that I had to spend extra $ on to fix. However, like I stated above, I am paranoid of potential mechanical failures in my tank, so not all of these are necessary upgrades.
 
Last edited:
#1. Welcome to R2R!

#2. Don't listen to everything an LFS tells you.

Test strips are horribly inaccurate. If thats what your LFS is using then you should get your own quality test kits and test for yourself or find another LFS to test for.

Adding buffer to raise ph is a horrible idea and I strongly preach against it. Properly mixed saltwater contains buffers already and adding more will only spike your alkalinity which is far worse than a slightly low ph. Chasing ph is one of the worst things you can do Ina reef tank.

Dead table shrimp is a common and great way to kick off a cycle in a marine tank. It all depends on if you bought "dead" or "cured" liverock.

There is no need to add any commercial products to help a cycle. Patience and test kits are all you need.

Remember that if you're not sure of what to do feel free to ask here. We aren't trying to sell you anything like the LFS. :)
 
1st off id like to say welcome to R2R, youll love it here.

As for your concern with the water test, i wouldnt really depend on the results of the test strips because imo they are just crap. I have also know the api test kits to be somewhat inaccurate but are way more dependable than the strips. You are also correct about the nitrogen cycle (ammonia being broken down to nitrites and nitrates) and the uncooked shrimp is an option that does work. Dr Tims one and only would be the best way to go if you wanted to jump start it though.
 
Last edited:
Wow! Folks sure are responsive here! Thanks for the welcomes!

KLR - Thanks for the input on the additions... and I have a heard through the grapevine about the heater as well.... do you have a recommendation on a heater that I can put in the same slot ?

Ritter - Thanks for the info about the ph and alkalinity relationship... do you recommend I perform any steps at this time to adjust the alkalinity at this time since I started my cycle? Since I have started the cycle last night, is it too late to add the shrimp? How often do you test your water (during cycle)?

Nolan - I would rather go a natural cycle and not cheat, but thanks for that (maybe when I need to setup a quarantine tank) - What test kits do you recommend? Honestly I wish there was something other than these shades of color matching, because I don't trust my judgement on some of them (the nitrate test I can't tell the difference between the 2.0 and 5.0 shades)
 
Issue 1 - Test Kits

I find it odd that I saw such a different reading on the ph level as my LFS. The reading of 7 vs 7.9 is major. As mentioned I used the API Saltwater Master Test Kit (using drops) while my LFS used the API 5 in 1 test strip. Is there a difference in reliability? Should I use the strips? Also my kit tests ammonia while the strips do not. The strips test General and Carbonate hardness while mine does not. I could use some recommendations on what I should be testing, and what are the best things to test with.

PH can be affected by the light cycle and also the flow of water in the tank. I would recommend adding power heads to move the water. The water should be flowing on the surface like boiling water.


Issue 2 - Ph

From the previous issue, my LFS said the Ph is quite low. They recommended using marine buffer, but I am not sure if I should wait on that. From what I understand, the sand and the rock increase and stabilize Ph (is this accurate?) and since I just added my RO/DI stripped saltwater last night , that could explain the low ph and the PH could rise over the time of the cycle. Also, should I be changing anything since my cycle just started last night?

I would not worry too much about the Ph right now.

Issue 3 - The Cycle

I have heard from multiple people that some folks throw dead shrimp in their tank to kickstart the ammonia levels in their tank. As I understand it, the ammonia breaks down into nitrates and nitrites which feed bacteria (is this accurate?) My LFS guy said he never heard of that and that the live rock I got should shed and start its own ammonia cycle and he recommends against the shrimp. I have been hearing that the cycle of ammonia > nitrite/nitrates > bacteria > zero ammonia would be 2 weeks, some say 4, some say 6. What is the general consensus here?

I have also heard of people performing multiple cycles to build up more bacteria/maintaining bacteria. The explanation being that once the bacteria eats all the nitrates/nitrites, if it is all gone they die since there is nothing to eat, so once the ammonia levels go down to minimal, he throws more shrimp in and kickstarts the cycle all over again. Can anyone comment on the validity of the bacteria dying off if the ammonia is gone? Is there a cycle guideline that covers every intricate detail?

You have ammonia in the tank so I would not worry about the kick starting the cycle. There are many guides online and each has its own way. I will try to find a good one for you.


Issue 4 - Start Up Product

The LFS that provided our saltwater said that since half of our rock is dead rock, we should use something called "Start Up" from a company called Prodibio. Here is the description:

START UP together in the same package STOP AMMO START and START Biodigest. It allows to quickly start the biological filtration of aquarium and then introduce a few hours after the first fish.
START UP NANO may be also used to treat a nitrite peak.
START STOP AMMO is a product based on extracts of specific plants whose main property is to trap the nitrogen from ammonia. Biodigest START is composed of bacterial natural nitrifying, denitrifying and optional selected for their ability to quickly initiate the nitrogen cycle and thus to transform the ammonia into nitrites, nitrates and nitrites into nitrate nitrogen.
START UP allows you to rapidly introduce third of your toughest fish in your aquarium (after 4 hours in fresh water after 12 hours in seawater).

This seems counter-productive to the natural cycle process correct? Should I use this product? What are the advantages vs disadvantages?

Ehhh. I would not use it in a sterile tank.

Issue 5 - Aiptasia

I was told that if you get live rock you will probably get aiptasia no matter where you get it. Now one of the tricks I heard was getting Peppermint Shrimp which love aiptasia, but my LFS guy said that sure it does, but once it is done with the aiptasia it will go after my coral. That is the last thing I want! I have heard of injections you can use, but I don't think I am experienced enough for that. I also heard other methods which involve taking the rock out, but I have that stuff in there exactly as I want it, and I really don't want to take it out. Does anyone know of an easy method to get rid of the stuff before it comes time to add my corals?

I have live rock and no aiptasia.


Issues 6 - Water temp

At this point in time, our water temp is 80 degrees. Our house ranges from 73-76 degrees. At the time I added the water, I did not have a thermometer, so I was not able to read the temp then. How long will a 65 gallon tank adjust to the ambient temperature in a room? There is no direct sunlight on the aquarium (there is ambient light from a well lit room - lots of windows - again no direct sunlight).


Issue 7 - Red Sea Max

I was wondering if anyone here has experience with a red sea max (I have the 250). I was wondering what issues people may have come across and how they resolved them. I am also interested in tweaks people have made to the system as an example I have heard of people adding chillers, powerheads, phosphate reactors, UV filters, etc. Any input into this system and its shortfalls would be greatly appreciated!


Issue 8 - The good stuff!

After the cylce is complete, what are the recommendations on what to add to the system at the beginning. I have heard of snails and hermit crabs to get rid of the crap that will grow during the cycling period. Anyone have recommendations on which ones? Also how long till I can add corals and fish? should fish come first, or corals? Any input is appreciated!


I think that is it for my questions, but any other tips and tricks for a beginner would be awesome!

Thanks all !!
Pez

I put my responses in the quote. Good luck with your tank!
 
Seahorsekeeper - The red sea max comes by default with 2 outputs from the filtration system. As a matter of fact, the one on the left hand side blew out all the sand in the corner of my tank so I aimed it up, and yes, the top now looks like boiling water. What do you mean by light cycle...

At this time I have my lights off during my cycle per recommendations I have heard.

Ok so I will leave my ph alone, but is there anything that absolutely should be addressed during the cycle?

Gotcha on the startup product... It kinda sounded like cheating to me and I would rather go through a more natural process anyway

I keep hearing nightmares about aiptasia coming in on live rock and spreading... I want to make sure I have absolutely zero in the tank before any fish or coral go in, though I am not sure what to look for or how to treat it (seen multiple arguments on this).

Thanks!
 
Here are some photos I took with my real camera that might give y'all a clearer idea of the set up:

Rock Aquascape
DSCN4792.jpg


Starting to fill with water
DSCN4793.jpg

DSCN4796.jpg

DSCN4796.jpg


Filled with water
DSCN4803.jpg

DSCN4811.jpg

DSCN4814.jpg

DSCN4817.jpg

DSCN4818.jpg


Hope this helps!
 
Welcome to R2R!! Great lookin' set up you have there!!
 
I just threw some shrimp in the tank.. At this time, I only have Red Sea Max's built in mechanical and biological filtration running. Since the shrimp is now in there, should I turn on the protein skimmer as well?

Also, do I just leave the shrimp in there until they are completely gone, or should I take them out after awhile?
 
Ritter - Thanks for the info about the ph and alkalinity relationship... do you recommend I perform any steps at this time to adjust the alkalinity at this time since I started my cycle? Since I have started the cycle last night, is it too late to add the shrimp? How often do you test your water (during cycle)?

)

If your using a quality salt mix and it's mixed properly then there should be no need to adjust alkalinity. Once you get good coralline algae growth, add stony corals or clams then your alk will be consumed and you'll need to supplement in some way.

I'd test the water every few days and document the results. Ammonia, nitrite and nitrate. Remember not to rush anything and don't add anything live until it's stable and mature.
 
If your using a quality salt mix and it's mixed properly then there should be no need to adjust alkalinity. Once you get good coralline algae growth, add stony corals or clams then your alk will be consumed and you'll need to supplement in some way.

I'd test the water every few days and document the results. Ammonia, nitrite and nitrate. Remember not to rush anything and don't add anything live until it's stable and mature.

I got it from a reputable LFS nearby. Not sure what they use.
 
You have a beautiful set up and a lot of room for goodies! I agree that test strips are horribly inaccurate.
Aiptasia can be rid by Bhergia Nudibranch. (Spelling sorry!)
I feel the best way to cycle a tank is to just give it lots of time. I do not believe in commercial products.
I would add some snails first. Then fish. The waste from the fish will help to feed your corals.
Good Luck!
 
Wow! Folks sure are responsive here! Thanks for the welcomes!

KLR - Thanks for the input on the additions... and I have a heard through the grapevine about the heater as well.... do you have a recommendation on a heater that I can put in the same slot ?

I switched to an Aqueon ProHeater and the results have been good so far!
 
Very cool! My fiancé and I just recently purchased the Max 250 also and we are loving it!

Can't wait to see more pictures as your tank grows!
 
Lookin good so far.

As for the shrimp .. no don't leave it in until its gone. Test every few days and when you got a good 2-4 ammonia reading then remove it and let the ammonia cycle through. You should see the following test results go through processing ammonia to nitrite to nitrate and then zero out of nitrate. Just watch the cycle and you should be fine.

As for additions Cleanup crew, then fish then coral IMO is the way to go. You need to get your fish feeding schedule and amounts down so you don't spike nutrients with alot of coral in the tank. Slow and steady wind the race.

As for aiptasia I use peppermint shrimp to rid my tank of aiptasia. As long as they get some food then they generally don't go after your corals. They are animals though and there are reports of satanic shrimp eating everything but there are also reports like the 2 I have that rid my tank of aiptasia. Moved to a friends tank and ate his aiptasia.. and now are chillin in my tank again and they eat mysid shrimp from my hand when i feed. This way I make sure they get a fair share when i feed.
 
Welcome.
I have owned a RSM 250 for about 16 months or so now and like it. The one thing I would do is get rid of the heater that comes with your tank and go with a different one. I am sorry but Can't remember what one I went with. The reason for removing the rsm heater is they have a tendency to get stuck on and will cook your tank. I have had my rsm heater get stuck on twice but luckily I only use it for my water change water. Other then changing the heater the RSM 250 is a great all in one tank.
Have fun and take it slow
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top