Red Sea Reefer G2

VMG · Apr 14, 2022

Has it not launched in America yet?
I thought the forums would be on fire!!
Launched about seven hours ago in UK!

hope you like it - new “precision valve” seems to still be a diaphragm, but the system is much easier to convert to US plumbing.

blaxsun · Apr 14, 2022

It's not exactly "plug & play" for the ReefMat - since you still have to run the tubing from one side of the sump to the other. But I like that the filter sock and media basket holders slide out now.

Ky_acc · Apr 14, 2022

Honestly this is now a “near perfect” reef tank setup, esp. with the dual return lines - great job Red Sea

swallace · Apr 14, 2022

I’m actually curious what’s different. I just purchased a Reefer-S 850 and now seeing the G2 version there doesn't appear to be any difference (aside from a $100 increase in price) at least not on their compare section of the site.

jp_75 · Apr 14, 2022

Not a bad price imho

DeepintheReef · Apr 14, 2022

The warranty is probably the biggest improvement. 3 years standard plus up to 2 additional years (assuming for a cost).

OfficeReefer · Apr 15, 2022

I too want to know what has changed from the Reefer 250 v3 sump and pipes. I bought their doser and their slide out, etc. but found with a true ATO and chiller, there was no room for the slide out panel on the right but only the left - except Red Sea wasted it with new pipes and a sump design. Anyone know if the 250 reefer G2 and sump have straight down pipes like before or wasted the space as they did with the Reefer 250 v3 design?

VMG · Apr 15, 2022

It will be in the installation manual on Red Sea’s website.

Poochaku · Apr 15, 2022

blaxsun said:
It's not exactly "plug & play" for the ReefMat - since you still have to run the tubing from one side of the sump to the other. But I like that the filter sock and media basket holders slide out now.

i think you just cut the tubing if you want it on the same side haha

DeepintheReef · Apr 15, 2022

Here is the email Red Sea sent out earlier today regarding their new systems. You can also check their YouTube for their latest couple of videos and one of them will be the video detailing all the changes to their new systems.

DeepintheReef · Apr 15, 2022

Deleted duplicate post

blaxsun · Apr 15, 2022

Poochaku said:
i think you just cut the tubing if you want it on the same side haha

Except you run into issues with location of the gravity fed ATO.

Sean Clark · Apr 15, 2022

I like that they include the ability to use metric or imperial plumbing sizes. The aluminium bracket under the front floating pane, silicone protection strips, and longer warranty are all "damage control" items from the bursting tanks of yesteryear. The beefer stands are a nice and needed upgrade in quality. The dual return nozzles are just keeping up with the Jones's.

Overall a nice improvement.

OfficeReefer · Apr 17, 2022

blaxsun said:
Except you run into issues with location of the gravity fed ATO.

Exactly. This is why I have a Trigger Systems ATO with Apex ATK, takes care of both. I really don't even care about the ATO at this point as I have it connected to a live RODI system that mixes up 10g of saltwater and is RODI for top off otherwise. The main issue with their ATO is its too small for most warmer regions where they are indoors. You'd think this would click with CTO (great presentations though) that any tank that has or needs room for a chiller probably has an issue needing regular ATO or at least a larger one than they ever include.

Now to get another Apex FMM and leak detection kits. Glad I invested on all the Apex stuff with the Nano model earlier...

blaxsun · Apr 17, 2022

OfficeReefer said:
Exactly. This is why I have a Trigger Systems ATO with Apex ATK, takes care of both. I really don't even care about the ATO at this point as I have it connected to a live RODI system that mixes up 10g of saltwater and is RODI for top off otherwise. The main issue with their ATO is its too small for most warmer regions where they are indoors. You'd think this would click with CTO (great presentations though) that any tank that has or needs room for a chiller probably has an issue needing regular ATO or at least a larger one than they ever include.

Now to get another Apex FMM and leak detection kits. Glad I invested on all the Apex stuff with the Nano model earlier...

Agreed - they really need to rethink their ATO setup and design. I like Cade's design with the ATO at the back of the tank.

PR_nano · Apr 17, 2022

The 300XL G2 is a the top of the list for me. It sounds like they took lots of user input and implemented in this version. Some of the mentioned updates affect the 350+ but still some nice features on the smaller size.

blaxsun · Apr 17, 2022

Anyone else who was hoping for a factory manifold upgrade? (even if only as an add-on)

Sean Clark · Apr 17, 2022

I still prefer the s series. I like the top bracing even just to keep splashes off of the front while cleaning.

zoaprince · Apr 22, 2022

DeepintheReef said:
Here is the email Red Sea sent out earlier today regarding their new systems. You can also check their YouTube for their latest couple of videos and one of them will be the video detailing all the changes to their new systems.

Only the 625 and above have the aluminum edge to support the floating front panel? that's disappointing

DeepintheReef · Apr 22, 2022

zoaprince said:
Only the 625 and above have the aluminum edge to support the floating front panel? that's disappointing

As a maintenance professional, I’ve worked with dozens of Red sea tanks and I’ve only seen issues with the seam separating on the 60 inch and above aquariums.