Redsea 90 and new WiFi router

[Wildblue4]

I’m needing to change to a new Router and the only item on my aquarium that I can’t change the WiFi setup/password is my Redsea 90 lights. Do I just delete them and start over? Surly there is a way to just look for a new WiFi and swap password??
Thank you for any advice.

 

[blaxsun]

Not that I could find in my ReefBeat app. You could try reaching out to Red Sea? Barring that, deleting and re-adding is probably your only recourse.

 

[Wildblue4]

Not that I could find in my ReefBeat app. You could try reaching out to Red Sea? Barring that, deleting and re-adding is probably your only recourse.

Thank you and in fact I did talk to Red Sea and in fact you do have to delete all of your equipment and reinstall them one at a time to change over to a different Router.

 

[gbroadbridge]

Thank you and in fact I did talk to Red Sea and in fact you do have to delete all of your equipment and reinstall them one at a time to change over to a different Router.

Why not set up your new router with the same WiFi SSID and password as the old one?

Save yourself reconfiguring every device in the house.

 

[Wildblue4]

Well that sounds good but also Greek to me. I’m not that tech savvy.

 

[Sneak]

You can keep the same settings if you change your router name and password to match your old one

 

[littlefoxx]

I’m needing to change to a new Router and the only item on my aquarium that I can’t change the WiFi setup/password is my Redsea 90 lights. Do I just delete them and start over? Surly there is a way to just look for a new WiFi and swap password??
Thank you for any advice.

I think theres a reset button on the physical light that you press and hold to factory reset the light then re connect them. This is what I remember seeing when I set my 90s up. Should be by the button that glows with the wi fi symbol if I remember right

 

[Wildblue4]

Why not set up your new router with the same WiFi SSID and password as the old one?

Save yourself reconfiguring every device in the house.

This is what I did off his advice and it worked perfectly.

 

[Rob3D2018]

Thank you and in fact I did talk to Red Sea and in fact you do have to delete all of your equipment and reinstall them one at a time to change over to a different Router.

this sucks! I need to do this as my router needs to be replaced. Red Sea needs to have some sort of backup config for cases like this.

 

[Wildblue4]

this sucks! I need to do this as my router needs to be replaced. Red Sea needs to have some sort of backup config for cases like this.

Why not set up your new router with the same WiFi SSID and password as the old one?

Save yourself reconfiguring every device in the house.

Do what @gbroadbridge said. Look it up if you don’t understand what he’s talking about. I googled it. When you set up your new Router just make the SSID and password match from the old one. Tip. Look up the SSID on the Router you’re running now, screen shot it and make it the new SSID on the new Router. Very easy. I did it and I’m no computer person.

 

[Rob3D2018]

Do what @gbroadbridge said. Look it up if you don’t understand what he’s talking about. I googled it. When you set up your new Router just make the SSID and password match from the old one. Tip. Look up the SSID on the Router you’re running now, screen shot it and make it the new SSID on the new Router. Very easy. I did it and I’m no computer person.

I got it fixed. The issue was that my new router had the 192.x.x.x address model which I hate. Prefer the 10.x.x.x

All good now.