Reef AutoTop off

[Nixon N Torres]

Hi
For sale

$50

AutoTop off W/

3 sensor switch Main controller

Introduction
The Marine Magic Auto-Top-Off system is specially designed for the use of marine tank. This is a low voltage device, safe and easy to use. It helps you to fill out the water automatically for the evaporation.

Features

1. Wall mounted and Table top design.
2. 12V, 1A device, low voltage operation, high safety.
3. 2 float switch control has 3 mode to operate.

• 1st mode 1 float switch simple operation. while water level drop under the float switch, water pump will be working for refilling.
• 2nd mode 2 float switch opeartion, 2nd one use as a second sensor while 1st sensor fail or block my snail.
• 3rd mode 2 float switch operation, 2nd one to detect the sump water is empty or not. While empty, the red LED will be on.

1. Magnetic and transparent float switch design. Easy to adjust and visible to bracket inside.
2. Brushless DC water pump. Lifting height is 2-3 meter

Using Instruction

1. Put the float switch wire through the float switch bracket top opening.
2. Connect the float switch to the bottom of the 2 plug. It has marking A and B on the back of housing.
3. Connecting the water pump to the controller. The plug is on the left of the controller. There is a ?PUMP? marking on the back of housing. Connecting the silicon tube to the water pump outlet.
4. Put the adaptor to the plug and connect to the unit. There is ?Power? marking on the back of housing.
5. Press the ON/OFF button. The white LED will be on if power connected.
6. Selecting your design mode, the blue LED indicate the mode you are using.
7. In mode 3, if the water in the sump is empty, the red LED will be on to alert you.