reef keeper lite questions

[Company101]

so I have been doing a ton of research on controllers... and decided on going with the Apex. but something intervened and I ended up with a reef keeper lite plus and a snazzy new laptop for $300.. and upon setting it up.... man I am so glad I got this thing....

so here s my issue... after several tries trials and failures... and resetting a few times I found my way around the software...
the problem I have currently is with the PM4 as I have equipment running but what i don't see are the blue status LEDS.. is this Common? or is there a fix?

I need to upload pics but I have a battle algea right now so I am holding back... tank is 7 months old...

 

[StikHedRon]

If your talking about the blue lights for each channel on the pc4, they only are on when that channel is on. Take a look at that and see if thats the issue.

 

[Company101]

If your talking about the blue lights for each channel on the pc4, they only are on when that channel is on. Take a look at that and see if thats the issue.

what I see is that they were working the first time I initially set it up.. say for example on my " sump " bar. I have a my return pump running and a my heater going... but the blue lights aren't on.. I have tried turning off the bar an back on... also that's we I did a few factory resets to see if I could fix it.... and the problem still exists....

 

[StikHedRon]

You got me then, I'd say if the channel is working your golden.... and as long as you can turn each channel on and off from the base unit.

 

[Company101]

You got me then, I'd say if the channel is working your golden.... and as long as you can turn each channel on and off from the base unit.

right now I am just doing everything with myreef so I haven't started playing with he head unit yet....


I got some time today.. I may just dump the whole system and start over again... now that I can breeze thru the software pretty easily....

 

[abinder]

right now I am just doing everything with myreef so I haven't started playing with he head unit yet....


I got some time today.. I may just dump the whole system and start over again... now that I can breeze thru the software pretty easily....

Did you ever find out what the problem was with the status lights?


Allen