reef-pi :: An opensource reef tank controller based on Raspberry Pi.

[AquaRaider44]

@Ranjib I am having some issues with the reef-pi dashboard. I updated yesterday and deleted everything off my dashboard because I wanted to get a fresh arrangement but when I went to add things back it is impossible to get temperature or ph to show up on the dashboard anymore.

 

[Ranjib]

@Ranjib I am having some issues with the reef-pi dashboard. I updated yesterday and deleted everything off my dashboard because I wanted to get a fresh arrangement but when I went to add things back it is impossible to get temperature or ph to show up on the dashboard anymore.

which version you are using? I fixed a dashboard bug in 3.1

 

[AquaRaider44]

which version you are using? I fixed a dashboard bug in 3.1

@Ranjib 3.1

So I click configure

Then it shows nothing i had in there

So I set everything I want

And then it ignores temp or ph

 

[Soulreefer]

@Ranjib 3.1

So I click configure

Then it shows nothing i had in there

So I set everything I want

And then it ignores temp or ph

I experienced the same thing. The dashboard now still has errors. version 3.0 is only the problematic led graph. version 3.1 display problem increases.

 

[All Mixed Up]

I'm unable to access my reef pi from any browser. I can remote into it through putty via ssh and the ip address. When I try checking to see if the service is running I get the following error:

Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: timers
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: system
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 reef-pi is up and running
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting http server at: 150gallon.local
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 ERROR: Failed to run http server. Error: listen tcp: address 150gallon.local: missing port in address
Jan 10 01:53:27 150Gallon reef-pi[4024]: Methods: [GET]
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 API Doc path: /api/settings
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting health checker
Jan 10 01:54:27 150Gallon reef-pi[4024]: 2020/01/10 01:54:27 health check: Used memory: 6.22 Load5: 0.03
Jan 10 01:55:27 150Gallon reef-pi[4024]: 2020/01/10 01:55:27 health check: Used memory: 6.49 Load5: 0.04


Any ideas?

 

[marekd1]

Bumping this post up in case someone can help

LDD's interface nicely with the reef-pi and PCA9685. All of my LEDs are LDD driven both 700 and 1000 ma. Just follow the light instruction guide and you will be fine. You pickup the 5V from Reef PI to drive 0-5V control voltage on PCA9685 PWM for the LDD's

 

[marekd1]

I'm unable to access my reef pi from any browser. I can remote into it through putty via ssh and the ip address. When I try checking to see if the service is running I get the following error:

Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: timers
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: system
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 reef-pi is up and running
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting http server at: 150gallon.local
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 ERROR: Failed to run http server. Error: listen tcp: address 150gallon.local: missing port in address
Jan 10 01:53:27 150Gallon reef-pi[4024]: Methods: [GET]
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 API Doc path: /api/settings
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting health checker
Jan 10 01:54:27 150Gallon reef-pi[4024]: 2020/01/10 01:54:27 health check: Used memory: 6.22 Load5: 0.03
Jan 10 01:55:27 150Gallon reef-pi[4024]: 2020/01/10 01:55:27 health check: Used memory: 6.49 Load5: 0.04


Any ideas?

delete the DB file and this will rest the reef-pi to defaults.

 

[All Mixed Up]

delete the DB file and this will rest the reef-pi to defaults.

What is the db file, and how would I go about deleting it?

 

[marekd1]

What is the db file, and how would I go about deleting it?

sudo systemctl stop reef-pi.service
sudo rm -rf /var/lib/reef-pi/reef-pi.db
sudo systemctl start reef-pi.service

 

[All Mixed Up]

sudo systemctl stop reef-pi.service
sudo rm -rf /var/lib/reef-pi/reef-pi.db
sudo systemctl start reef-pi.service

Awesome that worked. Thanks!

 

[marekd1]

Awesome that worked. Thanks!

you may find this helpful as well https://reef-pi.github.io/guides/troubleshooting/

 

[burningbaal]

sudo systemctl stop reef-pi.service
sudo rm -rf /var/lib/reef-pi/reef-pi.db
sudo systemctl start reef-pi.service

What is the db file, and how would I go about deleting it?

 

[Des Westcott]

Not yet.
https://www.takealot.com/tp-link-wifi-smart-power-plug/PLID43682665 Does this work for you ?

Yes. They will. Thanks!!!

 

[Ranjib]

I'm unable to access my reef pi from any browser. I can remote into it through putty via ssh and the ip address. When I try checking to see if the service is running I get the following error:

Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: timers
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Successfully started subsystem: system
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 reef-pi is up and running
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting http server at: 150gallon.local
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 ERROR: Failed to run http server. Error: listen tcp: address 150gallon.local: missing port in address
Jan 10 01:53:27 150Gallon reef-pi[4024]: Methods: [GET]
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 API Doc path: /api/settings
Jan 10 01:53:27 150Gallon reef-pi[4024]: 2020/01/10 01:53:27 Starting health checker
Jan 10 01:54:27 150Gallon reef-pi[4024]: 2020/01/10 01:54:27 health check: Used memory: 6.22 Load5: 0.03
Jan 10 01:55:27 150Gallon reef-pi[4024]: 2020/01/10 01:55:27 health check: Used memory: 6.49 Load5: 0.04


Any ideas?

Did you update the address? Looks like it’s missing port number . You have to reset it. St

@Ranjib 3.1

So I click configure

Then it shows nothing i had in there

So I set everything I want

And then it ignores temp or ph

This is a bug. I just noticed this. I dont know how i missed this, as i was working to fix this page. Sorry folks :-( . I'll release a patch soon.

 

[ummwhy]

Is that what's causing this, and my temp sensors not showing up? I just recently updated to the latest!

1/10/2020, 4:56:33 AM

UI

ERROR

{"error":"First line of device file does not ends with YES"} | HTTP 404

 

[Des Westcott]

I've just noticed something strange. I upgraded from 3.0 to 3.1

On/Off buttons for Temp and ATO show on my laptop and phone, but not on the screen I have attached directly to the Pi. As you can see, the screen attached to the Pi is showing it's running 3.1.

Weird.

 

[Ranjib]

I've just noticed something strange. I upgraded from 3.0 to 3.1

On/Off buttons for Temp and ATO show on my laptop and phone, but not on the screen I have attached directly to the Pi. As you can see, the screen attached to the Pi is showing it's running 3.1.

Weird.

whats the screen resolution?

 

[Ranjib]

Is that what's causing this, and my temp sensors not showing up? I just recently updated to the latest!

1/10/2020, 4:56:33 AM

UI

ERROR

{"error":"First line of device file does not ends with YES"} | HTTP 404

Possibly. The error here indicates at that time the sensor returned corrupted data (checksum mismatched error). reef-pi will discard such result. But if the timeline matches (error logged and spike in the graph), it likely means during that time period there were few values which has checksum correct but incorrect reading.

 

[Des Westcott]

whats the screen resolution?

I'll have to check. Will report back

 

[Phildago]

Is this an acceptable method of running my equipment every 2.5 hours ?