reef-pi :: An opensource reef tank controller based on Raspberry Pi.

Ranjib · Aug 24, 2018

Cal_stir said:
total 1.4M
drwxr-xr-x 2 root root 4.0K aug 24 15:34.
drwxr-xr-x 4 root root 4.0K aug 24 15:34..
-rw-r--r-- 1 root root 3.7K aug 19 21:15 favico.ico
-rw-r--r-- 1 root root 304 aug 19 21:15 home.html
-rw-r--r-- 1 root root 1.4M aug 19 21:15 ui.js

yeah.. everything looks alright. reef-pi is running, and all the ui files are also present, this is a client side issue. Something on the brower end. Can you check in javascript console, if you there are any errors : https://codex.wordpress.org/Using_Your_Browser_to_Diagnose_JavaScript_Errors#Chrome

MaccaPopEye · Aug 24, 2018

wykat said:
The PWM boards are on their way to me. They were ordered on 14 Aug. Shipment should take 2-4 weeks (other forums claim normally 17 days). So with some luck they will arrive next week

Will definitely also have a look at your housing . Temperatures will drop as of tomorrow so then I can start using my 3D printers again (We've had the longest heatwave ever measured and no Airconditioner, so not a good time to heat up further with 3D printing)

No worries, I'm not really in a rush

I'm going to be quite flat out over the next couple of months anyway.

And it's 34C and ~85% humidity every day for half the year where I live

I don't know how I grew up without aircon haha, without it I certainly wouldn't be running anything to make the room hotter either

Cal_stir · Aug 24, 2018

Ranjib said:
yeah.. everything looks alright. reef-pi is running, and all the ui files are also present, this is a client side issue. Something on the brower end. Can you check in javascript console, if you there are any errors : https://codex.wordpress.org/Using_Your_Browser_to_Diagnose_JavaScript_Errors#Chrome

got this

Ranjib · Aug 24, 2018

Cal_stir said:
total 1.4M
drwxr-xr-x 2 root root 4.0K aug 24 15:34.
drwxr-xr-x 4 root root 4.0K aug 24 15:34..
-rw-r--r-- 1 root root 3.7K aug 19 21:15 favico.ico
-rw-r--r-- 1 root root 304 aug 19 21:15 home.html
-rw-r--r-- 1 root root 1.4M aug 19 21:15 ui.js

This is fishy,
you mentioned you have installed reef-pi fresh today. If thats the case, these files will have today's time stamp. But they are 5 days old.

Cal_stir · Aug 24, 2018

Ranjib said:
This is fishy,
you mentioned you have installed reef-pi fresh today. If thats the case, these files will have today's time stamp. But they are 5 days old.

yes I reflashed the sd card and installed the 2.0.0 alpha, I tried that a few days ago as well

Cal_stir · Aug 24, 2018

Cal_stir said:
yes I reflashed the sd card and installed the 2.0.0 alpha, I tried that a few days ago as well

I used disk manager to erase the partitions and reformatted the card to default

pickupman66 · Aug 24, 2018

Go figure. My Archon was up when I got home. No clue why or how. Buys me some time.

janos · Aug 24, 2018

Hi to all, congratulation Ranjib 300 pages.Keep going,

pickupman66 · Aug 24, 2018

OK. I went and ordered the DJ bar, a Pair of ULN2803A integrated into boards with terminals a pair of the DB9 male ends, a female to female cable, and a screw terminal HAT with a small portion of breadboard on it. all but the ULN2803A will arrive by wednesday next week so we will get started. Wife liked the dj box better than a diy. go figure.

Ranjib · Aug 24, 2018

Cal_stir said:
got this

This looks ok.

pickupman66 said:
OK. I went and ordered the DJ bar, a Pair of ULN2803A integrated into boards with terminals a pair of the DB9 male ends, a female to female cable, and a screw terminal HAT with a small portion of breadboard on it. all but the ULN2803A will arrive by wednesday next week so we will get started. Wife liked the dj box better than a diy. go figure.

you will need a way to connect never 12v to 5v for pi ( adj power strip works on 12 v), and a 12v power supply as well (2 amp)

Ranjib · Aug 24, 2018

janos said:
Hi to all, congratulation Ranjib 300 pages.Keep going,

Thank you .
I noticed it right now

, 300 pages is a lot

pickupman66 · Aug 24, 2018

Ranjib said:
This looks ok.

you will need a way to connect never 12v to 5v for pi ( adj power strip works on 12 v), and a 12v power supply as well (2 amp)

12v supply ordered. I'll cut the end off and wire it in I guess. I ordered a few options so I can screw it up different ways. Lol.

Cal_stir · Aug 24, 2018

Ranjib said:
This looks ok.
What browser do you use?

you will need a way to connect never 12v to 5v for pi ( adj power strip works on 12 v), and a 12v power supply as well (2 amp)

janos · Aug 25, 2018

Hi i had the same problem with chrome browser,so i install and use Firefox.Firefox just for Reef-Pi and chrome for any another browsing.No more problem

Cal_stir · Aug 25, 2018

janos said:
Hi i had the same problem with chrome browser,so i install and use Firefox.Firefox just for Reef-Pi and chrome for any another browsing.No more problem

I tried firefox as well, same issue.
Should I have installed NOOBS on the sd card with raspian?

janos · Aug 25, 2018

Installed raspbian light headless,working like charm,first time i had problem with chrome,do not forget nothing from memory then i installed firefox and used only for Reef-pi.

https://howtoraspberrypi.com/how-to-raspberry-pi-headless-setup/

Cal_stir · Aug 25, 2018

janos said:
Installed raspbian light headless,working like charm,first time i had problem with chrome,do not forget nothing from memory then i installed firefox and used only for Reef-pi.

https://howtoraspberrypi.com/how-to-raspberry-pi-headless-setup/

Which release of reef-pi did you install?

janos · Aug 25, 2018

2.0.0-Alpha

Ranjib · Aug 25, 2018

Cal_stir said:
Which release of reef-pi did you install?

@Cal_stir this is not a reef-pi issue I think. There are many things strange I am seeing in the javascript console errors that you have posted. The errors messages (404) are benign, but the warning messages (react createClass etc) are not supposed to be there. I am not able to reproduce this, hence dont know how to proceed next. For reference, you said you are using google chrome running on windows? Can you share which version of chrome and windows you are using?
I dont have access to a windows machine. I have only mac and linux. reef-pi should work flawlessly on both latest chrome and firefox
If you can share details around your setup, I might be able to reproduce it, and then fix it.

Cal_stir · Aug 25, 2018

Ranjib said:
@Cal_stir this is not a reef-pi issue I think. There are many things strange I am seeing in the javascript console errors that you have posted. The errors messages (404) are benign, but the warning messages (react createClass etc) are not supposed to be there. I am not able to reproduce this, hence dont know how to proceed next. For reference, you said you are using google chrome running on windows? Can you share which version of chrome and windows you are using?
I dont have access to a windows machine. I have only mac and linux. reef-pi should work flawlessly on both latest chrome and firefox
If you can share details around your setup, I might be able to reproduce it, and then fix it.

Chrome version 68.0.3440.106
windows 10