Temperature or ph ? What check frequency you are using ? And are you waiting till the next check period ?
It's hard for me to tell from the pictures, but I think the wiring looks right.hi, help need setting pH board @Michael Lane and others
I'm trying to setup Micheal Lane pH board but i got nothing at i2cdetect -y 1, as it is not showing
i tried connecting with all other sensors ans connectors on and with the pH board only connected directly to the Pi
i attached pic for the connections and results, any ideas
thanks
HiIt's hard for me to tell from the pictures, but I think the wiring looks right.
Do you have any other i2c devices to confirm that the i2c bus is functioning properly?
+1 on temperature probe weirdness. There is reproducible interference (or something) when I turn on the led lights, but even with the lights disabled the temp data seems to "wobble" a lot more on 3.0, some of which are definitely not accurate readings.
oops. thats a bug .. fixed right now: https://github.com/reef-pi/reef-pi/pull/896In the past, Reef-Pi used to show the current temp from the sensor in the brackets circled below. I see it isn't showing. Is this something that's been removed? Will it come back?
the strange part is whatever the cause might be, its not reef-pi induced for sure. Since all of them are happening at raspbian/linux kernel layer :-/ . reef-pi is just reading and plotting the value,, same as 2.5 to 3.0+1 on temperature probe weirdness. There is reproducible interference (or something) when I turn on the led lights, but even with the lights disabled the temp data seems to "wobble" a lot more on 3.0, some of which are definitely not accurate readings.
Here's 2.5 (freshwater, looks correct) vs. 3.0 (reef, random spikes) charts for the day. There aren't lights or pumps or anything going off or on during this time that correspond to the spikes, so I'm kind of stumped.
Curious why you are selling them?
there are 5 or 7 pin min DIN jacks, mini hdmi, micro usb ?Does anyone have an idea of what type of plug and cable to use to connect my PCA9685 and my led drivers?
My PCA9685 is in a box with my rpi. My led drivers, power supply are in a separate box.
Im currently using a VGA cable but it is a bit cumbersome having a thick cable getting in the way.
I'm currently running 9 channels with LDD drivers but I will be updating my LEDs soon and will probably reduce to 6 or 7 channels.
USB-C ??
3.0 light ui is being worked on as I write this post. I am likely to cut another beta release next week that will have light UI support. I am assuming you are seeing these errors in the latest beta release
With 3.0 beta? which module? It will be helpful for us to know the extent of errors. I'll make sure we have tested all those paths as part of the final releaseI am getting errors and 500's. Frustrated and waiting now for full release in a few weeks. Back to HomeAssistant until then for me
Makes so much sense@Ranjib my wifes wedding ring lost a couple diamonds over the summer. She had been asking me to get her a new ring. So I bought her a new ring ...... and a pair of reefi extreme’s
, happy wife == happy life
pen /dev/i2c-1: no such file or directorypen /sys/bus/w1/devices/28-01191245a033/w1_slave: no such file or directory
