Reef - pi - Macro test.

[Dukereefnz]

Hi - Building a reef pi and are trying to test a dosing pump with a macro.
I can run the dosing pump using calibration for 10 sec.

I added a macro to run the dosing pump but it will not work.

step 1 - doser - doser test 1 - turn on.
Step 2 - wait - 12sec
step 3 - doser - pump test 1 - turn off.

Should this run the dosing pump for 12sec?

I have tried all sorts but it will not run the dosing pump.
any ideas?

 

[Weasel1960]

Check out some of the many reef pi threads I am also tagging @Ranjib for further help/direction

 

[woejillis]

Any progress here? I'm running into the same issue with Macros for dosing pumps.

The dosing pump works normally and I can calibrate but no action occurs when I setup and run a Macro for a dosing pump.

 

[woejillis]

I discovered that when the dosing pump is triggered 'On' wherein it runs on a schedule, the macro doesn't run as expected.

When I turn the dosing pump 'Off', the Macro for dosing will turn the pump on, wait, then turn it off as expected.