Reef Pi will not start after a reboot or power off.

[Brett7397]

I have reef pi installed on a Zero W. I don't know very much about using terminal commands. I know that I have to use sudo systemctl start reef-pi.service to get reef pi started. I have read 100's of post trying to find the steps to add this so reef pi will start on its own after a reboot. Can someone direct me to a step by step directios to show me how to do this? Thanks.

 

[ColoredRock]

reef-pi 6.0 - release announcement

Hi team, i have just updated the README of esp32 firmware , it covers the key pices (library install, api specifics for testing and how it works). @Sral let me know if you are planning to write a guide on the integration, then i will not worry about it :-) . Else, i'll try to write a more...

www.reef2reef.com

sudo systemctl start reef-pi.service
sudo systemctl enable reef-pi.service

 

[Ranjib]

Are you using wifi based driver ?

 

[Brett7397]

I'm not sure what you are asking. I used robsworld78 script to install reef pi and it updated to ver 6.0.

 

[robsworld78]

I'm not sure what you are asking. I used robsworld78 script to install reef pi and it updated to ver 6.0.

I was recently informed those commands were somehow missing from the script, not sure how or when I did that. If you still have the problem run these 3 commands again, that should fix it.

Software Installation Manual - Windows.docx

Raspberry Pi OS and reef-pi Software Installation Manual Using Windows - Robo-Tank Table of Contents Table of Contents 2 1. Install Raspberry Pi OS (Raspbian) 3 2. Access Raspberry Pi via SSH 10 3. Install reef-pi 12 4. Other Manuals 13 1. Install Raspbe...

docs.google.com

 

[Brett7397]

I ran the 3 commands again and it is working. I have rebooted it 2 times and it is running when I use Chrome to use the UI. Thank you for the help.

 

[robsworld78]

I ran the 3 commands again and it is working. I have rebooted it 2 times and it is running when I use Chrome to use the UI. Thank you for the help.

Thanks for confirming, sorry it had you going in circles.

 

[cypike]

Thank you for this thread, saved my butt too.

 

[Brett7397]

Glad it helped you. Mine is still working after multiple power off cycles. I'm in testing phase on my Reef Pi build.