Reef temperature monitoring
- Thread starter Medic56
- Start date
- Tagged users None
Bulk reef supply had video on heaters, I suspect they might have explained their testing method for accurate measurement. But do you mean for monitoring remotely like an Apex? Most k type thermocouple based thermometers are accurate enough for daily use, but calibrating the brs video may help.
braappn
Community Member
- Joined
- Sep 27, 2017
- Messages
- 86
- Reaction score
- 99
- Location
- Colorado
- What state or country do you live in
- Colorado
https://www.amazon.com/Thomas-Traceable-Dual-Thermometer/dp/B006T5B3KG
This is theoretically exactly what you are looking for, but I have found it to be tough to set up. I think it gets electrical interference from the other power cords and stuff around your tank.
It's great because it's cheap and it'll store the min/max readings along with the time that they occur. Also two probes can do display and sump, or tank temp and air temp.
Problem is mine will log false low temps in the 60s. I think if you could make sure to isolate the unit, including the cord and probes, away from other electronics it would work great for about 40 bucks.
This is theoretically exactly what you are looking for, but I have found it to be tough to set up. I think it gets electrical interference from the other power cords and stuff around your tank.
It's great because it's cheap and it'll store the min/max readings along with the time that they occur. Also two probes can do display and sump, or tank temp and air temp.
Problem is mine will log false low temps in the 60s. I think if you could make sure to isolate the unit, including the cord and probes, away from other electronics it would work great for about 40 bucks.
As an Amazon Associate we earn from qualifying purchases.
jhatfield
Active Member
- Joined
- Jan 28, 2016
- Messages
- 227
- Reaction score
- 123
- Location
- Santa Barbara, CA
- What state or country do you live in
- California
I've never had two thermometers agree. Best to get a few thermometers of different types and you'll get close enough. I use 3 including a hand held infrared which I use to easily measure different parts of the tank.
robert long
New Member
- Joined
- Aug 22, 2018
- Messages
- 1
- Reaction score
- 0
- What state or country do you live in
- United Kingdom
I have 4 different types on my tank. I checked and two of them were close within .5 deg c of a thermal camera. The worst reading 2c out was from seneye. I trimed that and now it's not too bad. Within .5 deg c at this time.
