Reefer170 gate valve

[Mark Bradley]

I saw it mentioned there was a easy (pictorial) guide, on here, for changing the gate valve - any one know where it is please?

 

[MnFish1]

Curious - why change it? EDIT - here is the link: https://www.ultimatereef.net/threads/uk-red-sea-reefers-changing-to-gate-valve-build.829112/

 

[Jeffcb]

Curious - why change it? EDIT - here is the link: https://www.ultimatereef.net/threads/uk-red-sea-reefers-changing-to-gate-valve-build.829112/

The RS valve on my 250 and 900 work great.

 

[MnFish1]

The RS valve on my 250 and 900 work great.

I have 2 redsea reefers also - no problem with the valve. Except I do take it apart and clean it (once now in 8 years or so) when a snail got into it and it was difficult to adjust. I would guess that could happen with any valve

 

[Jeffcb]

If you are having problems with yours, the trick is to adjust it slowly and wait a few minutes in-between adjustments.
Turning it clockwise raises the level in the over flow box.

 

[Jeffcb]

I just found a good sized mushroom in my sock. They make it through the RS valve.

 

[Mark Bradley]

Why? I can clean it, adjust it and it’s working great. Then for some reason it will suddenly overflow and be extremely noisy (the water pouring down the overflow). Their can happen over a period of days so there’s nothing obvious causing it - it will be great for days then go ape. My LFS says they have the same issue in their 170. There seems to be a lot of this problem talked about online.

 

[Mark Bradley]

So I decided to change the diaphragm - seems to have worked a treat.

 

[Mark Bradley]

I decided to contact Redsea. Turns out the Reefer170 requires a pump flow of 2,000lph - must have missed that in the instructions! My pump does 4,000lph and when the guy set it up he set it at maximum flow rate.
so I’ve reduced my flow rate and now appear to have consistency - I wonder whether others who have had this problem were aware of the recommended flow rates?