Reefkeeper temp: Changing °C to °F on controller functions

Fábio Cruz · May 31, 2018

Hi guys, I m Just figure out that my temp settings is different from the RKE Unit to Net browser.
On display both are showing the same Temp in Celsius, the problem is only on controller mode. (heater and chiller). On Unit it is showing the Temp in Celsius, but on NET web browser show the same temp configuration but in Fareheint. Both shoud be configurated to Celsius. Someone knows whats happening?
Thanks

Dr. Reef · Jun 1, 2018

goto head unit display and goto menu then goto system and under system goto units and change temp from F to C.

Fábio Cruz · Jun 1, 2018

I did this, but it is already in ° C on the Unit display. But when I try set the heater through the NET webserver browser it shows me the same temp in ° F.

Dr. Reef · Jun 1, 2018

there is another place, when logged in webpage goto general page and there under date/time you will find temp and you can change it there as well.
make sure all modules are on latest firmware and after updating firmware on all modules including net module upload latest webpage as well on the net module.

Fábio Cruz · Jun 1, 2018

Dr. Reef said:
there is another place, when logged in webpage goto general page and there under date/time you will find temp and you can change it there as well.
make sure all modules are on latest firmware and after updating firmware on all modules including net module upload latest webpage as well on the net module.

Yea, I did on webpage as well, both are in celsius. The home display of webpage also show in celsius... The problem is only on controller functions in webpage.
My Firmware informations:

Firmware Version v2.09 Aug 15 2011 09:41:16
Webpage Version v2.09 Sep 13 2011 09:27:25
System Uptime 186:32 (HH:MM)

Fábio Cruz · Jun 1, 2018

I already update the SL2, MLC and the RKE unit from 2.05 to 3.02. The NET and all 3 PC4's are on latest firmware. But the problem istil the same.
How I Can upload the latest webpage on the net module?
Thanks for help!

Dr. Reef · Jun 1, 2018

Using my reef 2.0 when you update the net modules with firmware there should be an option after you update the firmware to update the webpage as well

Dr. Reef · Jun 1, 2018

I may be wrong on the my Reef part. It's been at least a couple years I dumped my reefkeeper. Here is a link that might help you.
http://www.forum.digitalaquatics.com/viewtopic.php?t=8362

Dr. Reef · Jun 1, 2018

I think you have to go to their web page on the support site and download the net module bin file and in that file you will find a program that lets you update the firmware and the web page independently.

Fábio Cruz · Jun 2, 2018

From what I saw on forum there were some cases of problems with the NET module after this procedure... Im not so very comfortable to do this

Dr. Reef · Jun 2, 2018

Yes it can be problematic. I remember fiddling with it and it would go wrong sometimes. If you don't want to update it then simply revert all temp setting back to F and program RK to run on setting converted to F.

Fábio Cruz · Jun 2, 2018

Dr. Reef said:
Yes it can be problematic. I remember fiddling with it and it would go wrong sometimes. If you don't want to update it then simply revert all temp setting back to F and program RK to run on setting converted to F.

I think that's what I'm going to do.

Thanks a lot for the help.