reeflightmounts.com Kessil A360 A360w A360we mounts light stand.

[shred5]

These are Great and had them specially made. They swivel and are lockable. They have a channel and cover to hide the cabling.

Best of all they bolt to the stand and not the tank so you do not see the ugly feet on the tank.

They can be raised or lower really easy to if you do not like the height.

They also mount a special way so you do not need much room behind the tank if the tank is full of water already.

You just drill a hole through the stand and they bolt inside the stand, no screwing from the back. I had to use these vs the oem mounts where you have to get behind the stand and screw the screws from behind the stand. So basically you drill one hole from inside the stand the bolt is slipped trough from the back of the stand. There is a washer and knob you turn and it hold it tight from inside. Also the bolt moves up and down the rack so it can be mounted at different height inside the stand.


The arm length is not adjustable and sits pretty center on 18" to 20" width tanks. Anything wider it will sit a little farther back than center.

You no longer can get these.

This does not include lights.



I am asking 185.00 shipped for all three.. They were well over 100.00 a piece when I bought them.
I prefer to sell them together.

 

[shred5]

 

[shred5]

Still available

 

[shred5]

215.00 shipped.

 

[shred5]

Still available

 

[TheEngineer]

Wow! I’ve got one of these too. They’re amazing. I use mine to hang a radion XR15. It was th same Kessil variant.

 

[shred5]

Yea I love them but I just put a Giesseman t-5 fixture over the tank. They look so much better than oem and mount so much easier. I hate the ones that mount on the side of the tank. Yours looks nice for sure. I am not sure the actual mount is universal.



I though about keeping for my basement build but I am just hanging them from the basement ceiling.
It is not about looks in the basement.

 

[TheEngineer]

The ball on the end of the adjustment end is threaded. You can hang anything you can thread onto it

 

[shred5]

The ball on the end of the adjustment end is threaded. You can hang anything you can thread onto it

Could be different threads these thread right into the top of kessil.. They sold a different one for the Radions I believe but who know maybe they are the same. I just do not want someone buying them for a Radion and they do not work and needed a different version.

 

[TheEngineer]

Indeed! It takes a little DIY to make it work. Just trying to broaden your market appeal

 

[wiselyy73]

Awesome light mount. Wonder how much weight they can handle. I want two for my ATI fixture if they can support the weight and remove the mount for cables.

 

[shred5]

Indeed! It takes a little DIY to make it work. Just trying to broaden your market appeal

Thank you.
I have not looked but the bolt probably can be switched out.

 

[shred5]

Awesome light mount. Wonder how much weight they can handle. I want two for my ATI fixture if they can support the weight and remove the mount for cables.

They are very strong, the weak point would be the single bolt through the back of the stand. They would want to rotate. With a extra bolt it would not but not sure how to add one myself..

 

[shred5]

Still cannot believe these have not sold. These look so much better than the OEM that mount to the tank and they can be mounted to your stand even with the tank full without moving the stand out.

200.00 shipped.

 

[shred5]

Still available.

 

[lbacha]

Any chance you would sell 2? I don't need 3.

 

[shred5]

They are still available.

 

[shred5]

185.00 shipped for all 3.

 

[shred5]

Since a few asked about this I am posting it here.

Total length

 

[shred5]

Arm length