Return to Glass Box Reefing

[Srfnhooker]

Hi all. I'm returning to reefing after about 10 yrs. Don't know why I suddenly got the itch but I did and now I'm starting to scratch it. I picked up a used 120gd tank w/ stand, 40gb sump, 40gb qt tank w/ stand, aquatic life 4 bulb t5 hybrid unit, octo 202s skimmer along with a few other things. $400. I just received 3 new leds to add to the t5, return pumps, 2 power heads (will probably add 2 more) and Barracuda RODI unit. Still need rock, sand, salt, test kits, etc...

I have a question about the tank. I am doing a reseal job and have removed all the old silicone and overflows. The joints all in good shape. The top center trim/brace is in rough shape and cracked. The glass is 1/2 inch thick. Is it wise to try to remove the top trim or try to repair it using JB Weld or the like and repaint? Could I remove it and use glass bracing or euro brace (if top of glass is in good condition).

 

[Peace River]

Welcome to Reef2Reef!!! I have replaced resealed tanks and replace top and bottom frames so I am familiar with the process. It depends on the tank, it's condition, and your skillset - a lot of things are possible, but not always recommended. Good luck and proceed with caution!

 

[Fish Styx]

Greetings and welcome to the reef!

 

[Gtinnel]

Welcome to R2R. I have no experience repairing a tank but if it were me I would either replace the brace (if you can buy a replacement) or euro brace it.

 

[JZ199]

Welcome! And welcome back to the hobby!! I'll try to find where I got it from, but for my used 120 I had a while ago, I was able to order a whole new top brace to replace mine. (Center brace was also broke) previous owner used jb weld or some type of adhesive and it didn't hold it together.

 

[redfishbluefish]

Welcome @Srfnhooker to R2R.

 

[findingsimple]

Hello and Welcome!

 

[fishguy242]

Hi, welcome to the reef...

 

[ZoaAddiction81]

Welcome To R2R !!

 

[shakacuz]

welcome aboard the r2r board!

 

[threebuoys]

If you have any idea who manufactured the tank, give them a call to see if a replacement top frame is available. The frame is an integral part to the tank. If you try to repair, be absolutely certain the repair is rock solid.

 

[bnord]

Welcome and thanks for joining us

Have never replaced bracing, but seems if you are wondering, then you should - peace of mind....

 

[dlsorensen]

 

[vetteguy53081]

 

[Srfnhooker]

Welcome! And welcome back to the hobby!! I'll try to find where I got it from, but for my used 120 I had a while ago, I was able to order a whole new top brace to replace mine. (Center brace was also broke) previous owner used jb weld or some type of adhesive and it didn't hold it together.

Thanks jz. Not sure of manufacturer. I'll ask the person I bought it from if they know.

 

[Srfnhooker]

Welcome to Reef2Reef!!! I have replaced resealed tanks and replace top and bottom frames so I am familiar with the process. It depends on the tank, it's condition, and your skillset - a lot of things are possible, but not always recommended. Good luck and proceed with caution!

Thanks. I will try to get a replacement first. If not, I will remove it and euro brace, then do a long water test over a couple weeks. The bottom frame will remain. If it works, great, if not, I'll save and get new but will have to postpone the build.

 

[Keko21]

 

[JC1977]

 

[jsker]

 

[dstockwell]

Welcome to the Reef