RFG on Waterbox 20 cube
- Thread starter jmo040483
- Start date
- Tagged users None
Sure - for the WaterBox 10 (and 20) Cube , you'll need a single half inch RFG Nozzle and our 16.5mm to 1/2in modular hose adapter along with a few segments of loc-line
1/2in RFG
1/2in Random Flow Generator – RFG050 | Vivid Creative Aquatics
vividcreativeaquatics.com
16.5mm Modular Hose to 1/2in Loc-Line Adapter
16.5mm Modular Hose to 1/2in Loc-Line Adapter – FLEX | Vivid Creative Aquatics
vividcreativeaquatics.com
1/2in Loc-Line
Loc-Line – 1/2in modular tube – 6 knuckle segment | Vivid Creative Aquatics
vividcreativeaquatics.com
I actually just received a Watebox10 here in the office i need to setup, so I'll bee able to post a few photos in the next day or two.
Also - not sure what pump comes stock with the Waterbox20, but you will want to make sure whatever pump you end up with it is capable of at least 220-250 GPH (or more) for the best Randomized flow.
You would remove the flare nozzle from the stock fitting. Then 16.5mm modular hose adapter snaps onto the stock ball fitting. The loc-line then snaps onto the adapter and the RFG snaps onto the Loc-line.
I'll post a few pics later today once i get the 10-gallon cube unpacked. The 10 and 20-cube have same stock plumbing parts.
where are you located?
EDIT - Never mind - i just realized our shipping calculator has gone wacky. Give me a moment to fix it.
or the US State Georgia?
If the country then unfortunate yes, shipping will range from $28 to $68 USD depending on the country
If the State, then it should be $3.50 - 8.50
If you want to shoot me a PM with your ful address I can take a closer look.
The country Georgia in Europe?
or the US State Georgia?
If the country then unfortunate yes, shipping will range from $28 to $68 USD depending on the country
If the State, then it should be $3.50 - 8.50
If you want to shoot me a PM with your ful address I can take a closer look.
OK , please check it now. It should be returning the correct shipping rates.
Sorry for the confusion
OP
OP
jmo040483
Community Member
- Joined
- Dec 29, 2019
- Messages
- 52
- Reaction score
- 30
I live in the state of GA...it was only giving me 2 options for shipping and both were the international rates, I refreshed the page and it pulled up the regular rates...thanks sorry to bother...order has been placed!
Sure - for the WaterBox 10 (and 20) Cube , you'll need a single half inch RFG Nozzle and our 16.5mm to 1/2in modular hose adapter along with a few segments of loc-line
1/2in RFG
1/2in Random Flow Generator – RFG050 | Vivid Creative Aquatics
16.5mm Modular Hose to 1/2in Loc-Line Adapter
16.5mm Modular Hose to 1/2in Loc-Line Adapter – FLEX | Vivid Creative Aquatics
1/2in Loc-Line
Loc-Line – 1/2in modular tube – 6 knuckle segment | Vivid Creative Aquatics
I actually just received a Watebox10 here in the office i need to setup, so I'll bee able to post a few photos in the next day or two.
Thankyou for this.
I was thinking about purchasing a rfg, so I was doing some research and came upon this thread.
I was being lazy and didn't want to look up the adapters and parts etc that will fit my waterbox 20. Because of your response and explanation and placing of links for the parts It could not be easier and I just purchased all parts for this.
So really the purpose of this response is to comnend you are sharing this info but also for being a great Salesman and letting you know you made a sale that otherwise would not have happened.
It's back in stock now
They would work well.
I would suggest the 1/2in RFGs over the 3/4in and you'll need a set of our 22mm to 1/2in Modular Hose Adapters.
you can find the list of parts you'll need here:
Waterbox Marine and Reef Pro | Vivid Creative Aquatics
vividcreativeaquatics.com
bluerider098
Active Member
Thanks. I will get them on order.They would work well.
I would suggest the 1/2in RFGs over the 3/4in and you'll need a set of our 22mm to 1/2in Modular Hose Adapters.
you can find the list of parts you'll need here:
Waterbox Marine and Reef Pro | Vivid Creative Aquatics
