RKE ph probe

[VB68]

Can anyone tell me the step by step process for calibrating an RKE SL1 ph probe? Never done this before and could use some help......

 

[Loki]

I'm not at home and I haven't done it in a few months but I'll do my best.

From the main screen access your sl1 then your ph probe. It will have the option to calibrate. Select it and then tell it what ph your calibration fluid is (7 & 10). I let mine sit until the number stopped moving. It took about 30-45 minutes for each calibration. Rinse with RODI water between each step.

The steps to get to the menu I am unsure of.

 

[VB68]

I'm not at home and I haven't done it in a few months but I'll do my best.

From the main screen access your sl1 then your ph probe. It will have the option to calibrate. Select it and then tell it what ph your calibration fluid is (7 & 10). I let mine sit until the number stopped moving. It took about 30-45 minutes for each calibration. Rinse with RODI water between each step.

The steps to get to the menu I am unsure of.

Mine came with a ph 4 and 7 calibration fluid. Guess I need to get a ph 10

 

[Loki]

No not at all. Just tell it that you have a 4 and a 7.

 

[Loki]

The ones you have will work just fine. The main thing is to just make sure the numbers are done moving.

 

[MarineDepot]

Loki described the procedure well, and here's a link to the manual if you need it: http://www.f3images.com/IMD/UserManuals/DA1117.pdf. I hope this helps.

Chris R.