RO Membranes Filters & TDS Meters

All I want to do is cut down on waist water nothing else
 
What flow restrictor do you currently have installed?
With your existing flow restrictor, what is your ratio of waste water to purified water? This has to be measured, not estimated.
 
There was no flush valve or restrictor getting 3 waist to on good barrel of water
 
You DO have a flow restrictor on your existing system - if you didn't then it would not be making any purified water. Give us a call when you are in front of your system if you'd like help finding it.

Russ
 
Screenshot_2018-06-21-19-55-44.png
 
420_525 all i can see if that helps
OK - if you want to go with a little tighter flow restrictor, and a manual flush valve that will accommodate it, get the manual flush valve here: http://www.buckeyehydro.com/membrane-flush-kit/
and a 36 gpd [368 ml/min], or a 24 gpd [263 ml/min] flow restrictor here:
http://www.buckeyehydro.com/capillary-flow-restrictors/

The tighter you go on the flow restrictor, the less waste water flow you'll have, and the more likely you'll get scale deposition inside the membrane, assuming you have hard water.
 
OK - if you want to go with a little tighter flow restrictor, and a manual flush valve that will accommodate it, get the manual flush valve here: http://www.buckeyehydro.com/membrane-flush-kit/
and a 36 gpd [368 ml/min], or a 24 gpd [263 ml/min] flow restrictor here:
http://www.buckeyehydro.com/capillary-flow-restrictors/

The tighter you go on the flow restrictor, the less waste water flow you'll have, and the more likely you'll get scale deposition inside the membrane, assuming you have hard water.
Ok thanks have get on from the UK as that's we're i am
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top