Rodi Aqua tech 8800

[LOVEROCK]

what size tool is it to adjust PSI? , i used a loose fitting screw driver to loosen it up , im about 82 -85 psi, but i cant use the screw driver to tighten( to increase water) becauses its tool loose

 

[lapin]

It takes a small allen key / hex wrench

 

[LOVEROCK]

yeah i know, it does, acutay i might have solved my problem, i turn off water and psi reaches to lower 30 - 40 and i can adjust screw, im guessing with higher psi its not letting me turn it as much . i just set it to about 98-100 PSI

 

[lapin]

At too high a pressure your canisters can leak. Something to watch for.

 

[LOVEROCK]

At too high a pressure your canisters can leak. Something to watch for.

. It’s a spectrapure 90 gpd what do you recommend for psi

 

[lapin]

The ro mebrane works best at high pressure. Its the canister seals that will leak. I have never tested a spectrapure unit for max pressure. If yours is not leaking at 100 then go for it. I run my home made BRS type unit at 85. I dont like over tightening my canisters.