RODI Filters - Chloramines vs Free Chlorine

Birddog

Hooked on Reefing
View Badges
Joined
Nov 20, 2012
Messages
682
Reaction score
719
Location
Charlotte, NC
Rating - 0%
0   0   0
My local utility has just switched from chloramines to free chlorine until the end of this month. I have a BRS 5 stage Chloramines Plus system... anybody know if my present system will work with the free chlorine? Randy Holmes - Farley??
 
It won't know the difference. All the carbon does it remove the chlorine and break the bond with the ammonia which is removed by the RO membrane and the DI so it is going to function as it always does. Honestly I wouldn't waste money on so called Chloramine carbons, any good 1, 0.6 or 0.5 micron single carbon block is more than capable of removing the chlorine portion of chloramines, it is the membrane and the DI that are critical for removing the ammonia that I worry about.
 
It won't know the difference. All the carbon does it remove the chlorine and break the bond with the ammonia which is removed by the RO membrane and the DI so it is going to function as it always does. Honestly I wouldn't waste money on so called Chloramine carbons, any good 1, 0.6 or 0.5 micron single carbon block is more than capable of removing the chlorine portion of chloramines, it is the membrane and the DI that are critical for removing the ammonia that I worry about.

You're very kind, thank you for the response. I used to live in Phoenix myself and worked at a few golf courses in N. Scottsdale
 
I wish I could afford to play golf at the north Scottsdale courses! The Phoenix public courses and BellAire are more my speed.
 
I wish I could afford to play golf at the north Scottsdale courses! The Phoenix public courses and BellAire are more my speed.

Yea I hear you... i just worked there, really didn't play much golf there (Desert Highlands, Desert Forest)
 
It won't know the difference. All the carbon does it remove the chlorine and break the bond with the ammonia which is removed by the RO membrane and the DI so it is going to function as it always does. Honestly I wouldn't waste money on so called Chloramine carbons, any good 1, 0.6 or 0.5 micron single carbon block is more than capable of removing the chlorine portion of chloramines, it is the membrane and the DI that are critical for removing the ammonia that I worry about.

Have you seen the BRS test of their universal block? What do you think of it?
 
Yes I have. Their test is skewed for a coupleof reasons. One is they started with aout 4 mg/L chloramines which is the EPA Maximum Residual Disinfectant Level and not representative of real world where you normally see 1-2 mg/L. The other is they pushed the sytem beyond its normal operating range. No wonder they had chlorine breakthru. I would like to see it repeated using a single 0.5 micron sediment filter protecting a single 0.5 or 0.6 micron carbon block and single 75 GPD membrane at 50-60psi, 77 degrees F and 3:1 to 4:1 waste ratio, real world average conditions. The results would be different.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top