Rodi unit for sink tap conversion questions

[Shawcabelguy]

Wondering what I have to do to not use the pressure tank and the tap and just use it to fill my mixing station rodi tank, any ideas on what I need to cancel off or elbow instead of tee

 

[Gatorpa]

Just run the line that would go to the tank or the faucet to the tank you want to use.

Note one of the cartridges on the top maybe a carbon polish filter. don’t need unless you use for drinking.
Also I don’t really see a DI cartridge but the DI media may be in the solid canisters.

 

[FishFamilyRobinson]

You can put a small piece of tubing there then an on/off valve set to off. You might even be able to use the valve that would go on top of the pressure tank if you aren’t using it.

 

[Shawcabelguy]

It's just that I've go two output one also on a tee, and then there also both a larger size then the rest of the the tubing like 3/8 instead of 1/4 wondering which one I plug off and which I should run to my station or should I just 90 this and get rid of the tee

 

[FishFamilyRobinson]

Do you have any other connectors or tubing handy?

Also, the manual is missing parts. If you don’t want drinking water and just DI water, the filter labeled 5 can be pulled out completely. Then you will only have 1 outlet port that you can run to your rodi tank. There is a splitter under there somewhere going from the RO membrane to filter 5 and your blue DI filter. You may be able to rig it up without additional fittings but you may need a few extra.

 

[Shawcabelguy]

Thanks man I'll figure it out from here any more questions I'll let you know