Rodi water pressure.

[Marcom12]

So I have the BRS 4 stage plus unit.

When I hooked it up and made my first batch of water I had about 47 psi.... I know not 50 or above... But close.... I've made like 4 batches if about 40 gallons each....

Today I go to make a batch and my pressure is 19..... I don't know why... I flush my membrane before each batch... My fitlers don't look clogged or even dirty....

Any ideas on the sudden drop?

 

[User]

You might have a big particle blocking the input hole of the pressure gauge. I had same symptoms and found a 2.5-3mm calcifies piece of something in it. It’s downstream of the sediment filter but it was in there

Do you have a gauge you can screw onto your laundry supply line or outside faucet- that’ll tell you if it was a temporary system wide drop.

Had that happen once when utilities were flushing the hydrant down the street. Only lasted a few hours

 

[Marcom12]

Hmm no I don't have a separate gauge.... I can pop the lines off I guess and check.

 

[Marcom12]

Ok, I unhooked the line coming directly from the house plumbing and straight into pressure gauge. Getting about 41 psi... So must be something in system.

 

[Marcom12]

Hmm messed with all the connections and now it's working good lol

 

[User]

Yeah 41 on mains makes me think gauge blockage. messing with the hoses knocked it free

Glad it’s fixed