RSM 130 with Nanobox large retro kit

[Spiderwoman]

Hi everybody,
I'm renovating an old RSM 130 (yes the original) and have taken out anything and everything that was old and put in new stuff.
I ordered the Nanobox large retro kit from InTank and have pulled the old lights out of the hood. Has anybody done this to the 130 and if you have, can you share some pictures of how you did it.
Should I pull the reflector out or dremel through the reflector to get the fan some space?

Any help greatly appreciated.

Spidey

 

[DLHDesign]

Looks like the intent is to drill through the reflector?

(From here.)

Not sure if that'll help you or not (I've not done this at all, sorry).

 

[Spiderwoman]

Looks like the intent is to drill through the reflector?

(From here.)

Not sure if that'll help you or not (I've not done this at all, sorry).

Thanks!
I've seen that video where the retro kit has been installed on a different tank. RSM 130 has a much more restricted space to do this.

 

[Spiderwoman]

In case this can help someone else, Dave from Nanobox sent me this picture and I will try my best to do it this way.
For the drivers and bluefish you will need to goto Lowes and buy 10 4-40 x 1/2" screws and 1/4" stand offs to mount OFF the metal. You can not allow the boards to touch any metal.
Thanks Dave!