Rust on frag plug?

  • Thread starter Thread starter ianryd
  • Start date Start date
  • Tagged users None

ianryd

Active Member
View Badges
Joined
Dec 21, 2018
Messages
427
Reaction score
264
Rating - 0%
0   0   0
Not sure if this is the right forum to ask this but, I placed a tricolor acro frag which was still attached to the plug in my tank a little over a month ago. Today I decided to move it to lower light because its getting bleached. When I removed the frag there was a rust colored stain on the bottom of the plug where it was glued down, and on the putty it was glued to. I did cut the stem of the plug off with a rusty set of garden pruning shears when I first put it in. Could it be rust? Maybe a small amount rubbed off the shears and stuck between the epoxy and the plug? Or something else? Should I be worried about this and check my other frags?
20210117_111125.jpg

20210117_110806.jpg
 
Could be the kind of glue the seller used. I have had some frags come in that when broken off, had the same orange color as your picture. I also could be wrong.
 
No, rust only forms on iron and its alloys (it would not come in from rusty shears). It's probably the type of glue or a bacteria/algae that prefers the polymers in your glue.
 
Ok cool. I thought since there was no metal it wouldn't be rust, but thought I'd check. The epoxy I used was the TLF coraline color, so maybe that was extracted by the superglue somehow.
 
Did you ever figure out what this is? I’ve seen that as well in one of my zoa frags that I actually lost
 
Not sure if this is the right forum to ask this but, I placed a tricolor acro frag which was still attached to the plug in my tank a little over a month ago. Today I decided to move it to lower light because its getting bleached. When I removed the frag there was a rust colored stain on the bottom of the plug where it was glued down, and on the putty it was glued to. I did cut the stem of the plug off with a rusty set of garden pruning shears when I first put it in. Could it be rust? Maybe a small amount rubbed off the shears and stuck between the epoxy and the plug? Or something else? Should I be worried about this and check my other frags?
20210117_111125.jpg

20210117_110806.jpg
I'll never understand this. Think it's iron binding to something. Some frags will have this some won't so who knows. Super curious also!
 
Did you ever figure out what this is? I’ve seen that as well in one of my zoa frags that I actually lost
Never figured it out. I did scrape it off and it never came back on that plug. I actually glued it back down yesterday
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top