Saint's Reef Pi decision and build - with 3D printing

FYI, Please keep the overall depth of the project divisible by .25" As most material is sold this way. This way if there is ever a need to lets say CNC 100 cases this can be done with the files you are making :) just a idea... Also UL,ESA and so on can be done as well :P... ..
 
Looks great so far. If you guys could hurry it up a bit so I can save $800 on an Apex that would be good. LOL...kidding of course...this is exciting stuff. Looking forward to following the progress!

I will be posting the files once it is done, along with the full parts list, on Thingiverse. Shouldn't be too much longer before I have the design done.
 
FYI, Please keep the overall depth of the project divisible by .25" As most material is sold this way. This way if there is ever a need to lets say CNC 100 cases this can be done with the files you are making :) just a idea... Also UL,ESA and so on can be done as well :p... ..

Depth of 1 Part is 1", overall depth is 2". Some of the internals get weird with the tolerances of my printer... but they are usually around .01" increments, well within the 0.2mm layer height for my 3d printer.

Also, if someone wants to CNC 100 cases, hopefully they throw me a bone ;).
 
This is the type of project that makes me wish i could quite my job and start building this into a company. Imagine if reef-pi controllers could be the next mainstream controller that was accessable to everyone of all skill levels
Also, if someone wants to CNC 100 cases, hopefully they throw me a bone ;).

hahaha.. bone....

But seriously, finding a way to mass produce this for the hobby would be epic. Especially if it could be modular and available to those who loved DA before they went out of business.
 
Any updates ? :)

Sorry for the delay on things. We have the prototype of the housing printed and 99% of the parts ordered, but life got in they way for both of us. We both have our full job, plus he has a full house while i have a second job/hobby. So this got set to the side for a couple of weeks while we work on another project. I am debating buying a new printer this week to help us with our plans.

Ill dig through my phone to see if i have the test print pictures loaded.
 
Round one with test fit practice.

Also designed my logo, but need to figure out a way to get it virtual. I don't have a skill set in the drawing side of the house.
d502b254bda8705484a32a7afe076e91.jpg
bf90c4210c748e6cbc1e1485558eece0.jpg
 
So really awesome update...

This project is getting delayed :D

Why would i possibly be happy about this? Well, after a lot of back and forth, thoughtful conversation and future planning.... We are buying a new printer. This one will do sharper prints and more precise functions. So we will get that in next week, tinker with it for a bit and then knock this out. :D
 
So really awesome update...

This project is getting delayed :D

Why would i possibly be happy about this? Well, after a lot of back and forth, thoughtful conversation and future planning.... We are buying a new printer. This one will do sharper prints and more precise functions. So we will get that in next week, tinker with it for a bit and then knock this out. :D

It's a happy update!
Which new printer will be arriving next week?
 
Looks great @saintsreturn.

One thing you might consider is a mechanical method for screw mounting. When mounting PCB(s) and/or 3d printed parts together, screws into 3D printed plastics can strip out or worse crack, leaving you with a lot of wasted printing time. For what you are doing PEM makes a great press in insert PFLB-256-1 ( you can find them on Amazon). You can then use #2-56 screws (Fastenal) for secure mounting and prototyping without stripping out plastic. I typically will print the insert opening at 3.2mm diameter then with a drill press with a stop, tap out to 3.175mm (1/8" bit). Tap the insert with a Philips head and hammer, or your hand. A slight filet at the top of the opening will aid in guiding the insert. Pem provides CAD files for all their inserts so you can verify tolerances in your model.

Screen Shot 2019-02-11 at 2.49.59 PM.png


Keep up the awesome work, looks impressive.
 
Looks great @saintsreturn.

One thing you might consider is a mechanical method for screw mounting. When mounting PCB(s) and/or 3d printed parts together, screws into 3D printed plastics can strip out or worse crack, leaving you with a lot of wasted printing time. For what you are doing PEM makes a great press in insert PFLB-256-1 ( you can find them on Amazon). You can then use #2-56 screws (Fastenal) for secure mounting and prototyping without stripping out plastic. I typically will print the insert opening at 3.2mm diameter then with a drill press with a stop, tap out to 3.175mm (1/8" bit). Tap the insert with a Philips head and hammer, or your hand. A slight filet at the top of the opening will aid in guiding the insert. Pem provides CAD files for all their inserts so you can verify tolerances in your model.

Screen Shot 2019-02-11 at 2.49.59 PM.png


Keep up the awesome work, looks impressive.

Thank you for the info! We will check it out
 
Printer will be here Thursday, just in time for me to leave for vacation. When i get back, we will hopefully be on our way to having this housing finished and wiring started :D Now... what else did i forget to order?
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top