Salinity Probes that work with the Apex

[nunoml]

Or this one

https://a.aliexpress.com/_Euwgn9P

I just bought the other one. This one the shipping its very expensive.
Thank you

 

[A3LXK]

I just bought the other one. This one the shipping its very expensive.
Thank you

Let us know if this probe is working. When will it be delivered at your place?

 

[nunoml]

Let us know if this probe is working. When will it be delivered at your place?

Yess. 2 weeks

 

[Tony73]

Hello
I'm Reading all thread, not easier
I write from Italy

I bought some weeks ago A3 APEX PRO

I would like tò add SALINITY PROBE tò APEX PRO, bit i don't want to spend 200€ for.the original One.

Which ia compatible proble with right adapter for Apex pro (i'm not able tò do DIY) ?

Thanks for all

 

[Lbrdsoxfan]

Except the Neptune branded probe, all these probes require DIY.

 

[Tony73]

Except the Neptune branded probe, all these probes require DIY.

DIY Just to change connector ?

 

[Sisterlimonpot]

DIY Just to change connector ?

Yep

 

[Tony73]

I will wait experience @nunomi with AliExpress probe

 

[Lbrdsoxfan]

I will wait experience @nunomi with AliExpress probe

That probe will need to be modified as well.

 

[Tony73]

I Will ask support tò my friend to solder

That probe will need to be modified as well.

 

[Tony73]

Is it possible without solder to use this extension from BNC to Mindi Din 4 pin?

 

[Lbrdsoxfan]

Is it possible without solder to use this extension from BNC to Mindi Din 4 pin?

Read the thread in it's entirety, a few members tried that also. No it does not work.

 

[nunoml]

I just receive the probe but they send me the DJS-10. I open a complain and they send me the image attached showing the right image for each probe. So, I have 15 days to send back, but before Im going to try it, if it works I keep it.

I bought

bnc connector ( waiting to receive )

https://pt.aliexpress.com/item/1005004707171648.html?spm=a2g0o.order_list.order_list_main.46.6382caa4Z5gU3B&gatewayAdapt=glo2bra

4 din cable that im going to cut on the middle and connect to the BNC female connector

https://pt.aliexpress.com/item/1005005778296644.html?spm=a2g0o.productlist.main.5.60a65cf8qGujnx&algo_pvid=46f235fa-d15b-4661-afee-398cef0d6160&algo_exp_id=46f235fa-d15b-4661-afee-398cef0d6160-2&pdp_npi=4%40dis%21EUR%211.86%211.67%21%21%211.99%211.79%21%402101e58317050098127211054e0751%2112000034320332737%21sea%21PT%21782550764%21&curPageLogUid=gWmsOdk9yizg&utparam-url=scene%3Asearch%7Cquery_from%3A

Any advices ?

 

[A3LXK]

I just receive the probe but they send me the DJS-10. I open a complain and they send me the image attached showing the right image for each probe. So, I have 15 days to send back, but before Im going to try it, if it works I keep it.

I bought

bnc connector ( waiting to receive )

https://pt.aliexpress.com/item/1005004707171648.html?spm=a2g0o.order_list.order_list_main.46.6382caa4Z5gU3B&gatewayAdapt=glo2bra

4 din cable that im going to cut on the middle and connect to the BNC female connector

https://pt.aliexpress.com/item/1005005778296644.html?spm=a2g0o.productlist.main.5.60a65cf8qGujnx&algo_pvid=46f235fa-d15b-4661-afee-398cef0d6160&algo_exp_id=46f235fa-d15b-4661-afee-398cef0d6160-2&pdp_npi=4%40dis%21EUR%211.86%211.67%21%21%211.99%211.79%21%402101e58317050098127211054e0751%2112000034320332737%21sea%21PT%21782550764%21&curPageLogUid=gWmsOdk9yizg&utparam-url=scene%3Asearch%7Cquery_from%3A

Any advices ?

The DJS-10 is the correct one and should work. I would cut the connector from the original cable from the old probe and connect this to the probe.

 

[juarec0201]

Following

 

[Tony73]

I've done order Yesterday to same seller in AliExpress
I've chat with seller, they Will do work for me, probe Cell constant 10 with mini din 4 solder instead of BNC as by instruction provided:
The probe has a BNC connector, but an adapter is very easy to make. The inner pin of the BNC goes to pin 1 of the mini din 4 pin connector. The outside of the BNC goes to pin 2 of the mini din 4 pin connector.

It Will do with 15$ more includere solder and din 4 PIN provided.

I get a risk hopping It Will work

 

[nunoml]

The DJS-10 is the correct one and should work. I would cut the connector from the original cable from the old probe and connect this to the probe.

Do I need to calibrate this probe ?

 

[Sisterlimonpot]

Do I need to calibrate this probe ?

Yes, you'd calibrate the same way you'd calibrate the original probe.

 

[Tony73]

Hello @nunomi

Is It working?

 

[nunoml]

it worked for a few days and start to loosing the accuracy .... Check the images attached its the SALT_AQ.

Should I calibrate again ? Its on the same place since day one.

3 Day

7th Day

10th Day