Sam's Oceanic 120 - DIY solutions

[Katrina71]

haha one was traded to me as a jawbreaker for i think some chaeto awhile back. it didnt start multiplying tuntill just recently though. and the red ones are all over now.

Would you ever frag and sell one down the road?

 

[Projects with Sam]

Would you ever frag and sell one down the road?

for sure!

 

[Projects with Sam]

Sam, did you make that Roller mat?!? It’s a thing of beauty. - like Apple lvl design

wow thanks! I always liked their designs!
I cant wait to show you all what I've been working on!
it even has a big media drawer!

its a proof of concept I'm working on to test a few more things for a client's much much bigger design.

 

[ESABOE]

wow thanks! I always liked their designs!
I cant wait to show you all what I've been working on!
it even has a big media drawer!

its a proof of concept I'm working on to test a few more things for a client's much much bigger design.

You might be getting another client once you’ve got it in final iteration- or is there such a thing in design- hehe

 

[Katrina71]

Agree, it looks like an Apple product. Very clean design!

 

[rmorris_14]

would you describe it as clean as say,............ a clam?

 

[fishguy242]

would you describe it as clean as say,............ a clam?

She's back...

 

[rmorris_14]

She's back...

hahaha I am starting to feel a bit more like "THAT Becky".

 

[Projects with Sam]

moved the roll to the top so its easier to check if baby cardinalfish get washed into the filter.
so far its working without issue.

 

[Projects with Sam]

just got this printer:

Amazon.com

roll my own marlin so as long as i can align it all up, it should be another CR-10.
if it doesn't work as a printer its still a great deal for the parts!

 

[Projects with Sam]

the printer is awesome for the price. very functional out the box. I got another one because you cannot beat that price... I think they have it up in error because it has most everything you want for a gantry-style printer. for 310x310x400 build volume it cannot be beat. My CR-10 is 4 years old at least now and needs a full rebuild/tuneup. I don't even want to think about how many hours its been running.

*edit:*
the firmware on these SunLu S9s is great. I'm not changing a thing. will just print for as long as I can.

guess not an error:

SUNLU | Affordable 3D Printing Filaments, Filament Dryer and 3D Resins

SUNLU Official Online Store, Free Shipping. You can buy SUNLU 3D printer filament like PLA, PLA+ filament, Filament Dryer and 3d print resin for your 3d printer.

www.sunlu.com

its nice they offer their Marlin install right there on the site...

 

[Fishy Guy]

the printer is awesome for the price. very functional out the box. I got another one because you cannot beat that price... I think they have it up in error because it has most everything you want for a gantry-style printer. for 310x310x400 build volume it cannot be beat. My CR-10 is 4 years old at least now and needs a full rebuild/tuneup. I don't even want to think about how many hours its been running.

*edit:*
the firmware on these SunLu S9s is great. I'm not changing a thing. will just print for as long as I can.

guess not an error:

SUNLU | Affordable 3D Printing Filaments, Filament Dryer and 3D Resins

SUNLU Official Online Store, Free Shipping. You can buy SUNLU 3D printer filament like PLA, PLA+ filament, Filament Dryer and 3d print resin for your 3d printer.

www.sunlu.com

its nice they offer their Marlin install right there on the site...

I don't need any more hobbies, I don't need any more hobbies, I don't need any more hobbies...

 

[nuxx Verified Sponsor]

moved the roll to the top so its easier to check if baby cardinalfish get washed into the filter.
so far its working without issue.

Wish these were a thing when my tank was running UGH!

 

[Projects with Sam]

 

[Mhamilton0911]

Question, I printed a petg piece today, it was a small shelf. The bottom curled up from the build plate. But the top was still square. I think it was 60x80mm and 10mm thick. Temps were 240/80, semi enclosed area, I have a sheet draped and enclosed as best as I can. I don't have any problems with smaller pieces.

 

[Projects with Sam]

Question, I printed a petg piece today, it was a small shelf. The bottom curled up from the build plate. But the top was still square. I think it was 60x80mm and 10mm thick. Temps were 240/80, semi enclosed area, I have a sheet draped and enclosed as best as I can. I don't have any problems with smaller pieces.

so, the amount something moves depends on a bunch of things but long slender things have way more force prying them up because the shrinkage occurs most notably along the length of the part.
So, for the Noop shades I do, I have a whole crazy support structure I manually modeled & don't let anyone see because its impossible to print the long, narrow parts without warping / lifting.

 

[Projects with Sam]

oops! my QT turned into a nano!

got some ParlaBoxes!

Blew off my rocks a little --> black filter paper...

finally filled the media drawer with a bag o' carbon

 

[tbrown]

But is it really a true nano without a Sponge Bob pineapple though?

 

[Projects with Sam]

Guess we'll all start putting speakers in our tanks now...

 

[fishguy242]

Guess we'll all start putting speakers in our tanks now...

Rock that reef @MERKEY ...