Sam's Oceanic 120 - DIY solutions

[tbrown]

I love how grumpy Timmy looks

I am not grumpy looking!

 

[tbrown]

 

[tbrown]

Speaking of Cuttlefish... Here's a Jellyfish.

 

[Projects with Sam]

Awesome! stoked when I can make someones reefing experience better!

Done With Filter Socks! Much Easier Way!

So tired of pulling out, cleaning in the washing machine, buying bleach, & replacing filter socks! Too much work! Replaced filter socks with these inexpensive, 3D printed filter cups! Now I replace a small piece of filter floss once a week in just a couple of seconds. Big thanks to @Projects...

www.reef2reef.com

 

[Projects with Sam]

Bummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...

he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.

 

[crusso1993]

Bummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...

he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.

Sorry bud.

 

[Projects with Sam]

Posted a bunch of new products!

Skimmer CO2 Scrubber Cap

3D printed skimmer cap to hold bags of soda lime to reduce CO2 in the skimmer air intake. The top cap has two 6.5mm O.D. tubes protruding from the rim. These tubes should be attached to the skimmer air input. If your skimmer is not listed, contact me and I can add it. This is still in...

parlaquatics.com

for the Aquamaxx Bullet 2 Hang-On Back Skimmer

4" Filter Sock Cup - Filter Sock Replacement System

Filter Sock cup for 4" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...

parlaquatics.com

EcoTech XR15 Light Shade Model 1

This light shade is designed for the XR15 aquarium light by EcoTech. It works on gen 3-6 XR15s. Its been tested on the Gen6 version but will also fit many other XR15 models.

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube Long (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - Hook (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be cradled in-place.This part, once twisted into place on the extrusion, can support many wires and keep them relatively well-organized while still leaving them accessible. One-hand...

parlaquatics.com

Twist nut for 4545 extrusion - ZipTie (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be Zip-Tied in-place.This part, once twisted into place on the extrusion, can have up to two zip-ties securing things. One-hand operation for those tough to access places.Convenient...

parlaquatics.com

Twist nut for 3030 extrusion - 6mmTube Long(12 pack)

This small piece of plastic twists securely into 3030-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

 

[rmorris_14]

Posted a bunch of new products!

Skimmer CO2 Scrubber Cap

3D printed skimmer cap to hold bags of soda lime to reduce CO2 in the skimmer air intake. The top cap has two 6.5mm O.D. tubes protruding from the rim. These tubes should be attached to the skimmer air input. If your skimmer is not listed, contact me and I can add it. This is still in...

parlaquatics.com

for the Aquamaxx Bullet 2 Hang-On Back Skimmer

4" Filter Sock Cup - Filter Sock Replacement System

Filter Sock cup for 4" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...

parlaquatics.com

EcoTech XR15 Light Shade Model 1

This light shade is designed for the XR15 aquarium light by EcoTech. It works on gen 3-6 XR15s. Its been tested on the Gen6 version but will also fit many other XR15 models.

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube Long (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - Hook (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be cradled in-place.This part, once twisted into place on the extrusion, can support many wires and keep them relatively well-organized while still leaving them accessible. One-hand...

parlaquatics.com

Twist nut for 4545 extrusion - ZipTie (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be Zip-Tied in-place.This part, once twisted into place on the extrusion, can have up to two zip-ties securing things. One-hand operation for those tough to access places.Convenient...

parlaquatics.com

Twist nut for 3030 extrusion - 6mmTube Long(12 pack)

This small piece of plastic twists securely into 3030-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

You’re a rockstar!

 

[Projects with Sam]

You’re a rockstar!

Thanks! Getting an AI 16 shade out soon too.

 

[Petcrazyson]

Every time I’m thinking it’s going to be something serious

Speaking of Cuttlefish... Here's a Jellyfish.

 

[Cthulukelele]

Bummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...

he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.

Always hard to lose a fish. At least you gave it a good life while it was in the tank. Sorry for your loss

 

[Petcrazyson]

Hey @tbrown3589 I know you love dogs I found this

 

[N1tew0lf1212]

Hey bro ParlAquatics is poppin now....awesome glad to see things are moving along.....it sucks losing a fish bro.....when you said resuscitate i totally though this but then realized shortly after I was the only one thinking that.....smh sorry bro

 

[tbrown]

Hey @tbrown3589 I know you love dogs I found this

Almost got me but I looked at it yesterday during my Rock Roll run. Thanks though!

 

[Petcrazyson]

Almost got me but I looked at it yesterday during my Rock Roll run. Thanks though!

So close

 

[Projects with Sam]

Build Thread - A Wolf In The Nights 150g DT

Updates :D?

www.reef2reef.com

 

[Projects with Sam]

A pal hooked me up with my first torch and a couple of digi/birdsnest


frag tank shots: (after vacuuming up all the cyano)


random shots:

The green flash 1 minute before lights out...

 

[crusso1993]

A pal hooked me up with my first torch and a couple of digi/birdsnest


frag tank shots: (after vacuuming up all the cyano)


random shots:

The green flash 1 minute before lights out...

I saw this same post somewhere last night. Or maybe I’m having a dé ja vu. Or maybe I’m a soothsayer and don’t even know it! In any case, nice score and great reminder of what this hobby is all about. Taking care of marine life and each other!

 

[Projects with Sam]

I saw this same post somewhere last night. Or maybe I’m having a dé ja vu. Or maybe I’m a soothsayer and don’t even know it! In any case, nice score and great reminder of what this hobby is all about. Taking care of marine life and each other!

I meant to post it on my thread but put it on franks accidentally. was burning some midnight poil last night.

 

[rmorris_14]

I meant to post it on my thread but put it on franks accidentally. was burning some midnight poil last night.

What’s poil?