SBB- Spring Fling Blowout

[stoney7713]

measuring par today for the 1st time. I hope I don't screw it up

Nothing to mess up, just get the readings and

 

[MarsReefer]

measuring par today for the 1st time. I hope I don't screw it up

Point meter up towards the light, write down number, repeat.

The real trick is if you want to do it during your ramp too and over how many points. You cna end up with a lot of numbers.

 

[Thuan]

Point meter up towards the light, write down number, repeat.

The real trick is if you want to do it during your ramp too and over how many points. You cna end up with a lot of numbers.

Go toward the light. I'm planning to measure morning, peak, and afternoon

 

[robanister]

200 below no 5. 70 pg to go

 

[stoney7713]

200 below no 5. 70 pg to go

 

[Nate Chalk]

measuring par today for the 1st time. I hope I don't screw it up

I did mine before I added 2 radion g4 pros

was lower than I thought with orphek bars and kessils

I havent retested but since I added the radions my acros have definitely started moving.

 

[Nate Chalk]

I havent tested Tank Water in 10 days (with exception of the kHguardian)

 

[dr_vinnie_boombatz]

Go toward the light. I'm planning to measure morning, peak, and afternoon

question is.... with flow or without.... (I measure with flow on and take an average)

 

[AKL1950]

Morning everyone! Feeling a little left out since I’m not in the buying mode right now, so took a video of the tank to share. Everything is growing out well. There are 12 fish, but the PB seems to be the only one that doesn’t hide when the camera is out. The rest are in the shadows. The bigger Acro colony’s are from other vendors, but most of the frags and mini colonies are SBB. Thinking of building another structure on the left side to house the frags still on the rack. Enjoy.

 

[banik]

Anyone running uv full time?

I added one about a month ago. It's oversized for my tank, so I've turned it off a couple times when it was hot inside because I had all the windows open. It's running at a flow rate that should take care of parasites and things like that. What's your question?

 

[robanister]

Looks like it's all cleared out if someone took the red hot

 

[robanister]

Looks like it's all cleared out if someone took the red hot

@SBB Corals can you confirm

 

[6t4nova]

Wonder if this would be enough super glue

 

[AKL1950]

I added one about a month ago. It's oversized for my tank, so I've turned it off a couple times when it was hot inside because I had all the windows open. It's running at a flow rate that should take care of parasites and things like that. What's your question?

I’ve run UV full time ever since I started my current tank. New bulbs every 6-8 months. Have never had I problem with it.

 

[Nate Chalk]

Eek basically on verge of ULNS.... Upped nitrate dosing.

Closer to on track with stick consumption of calcium. Tweaked that doser as well.

 

[MarsReefer]

Wonder if this would be enough super glue

Realized I did not have nearly enough for what I ordered lol. Hopefully this is enough.

 

[T_A Reef]

Looks like it's all cleared out if someone took the red hot

i don’t think there’s any left , whatever 1/5’s doesn’t sell Shane posted yesterday at cyclone.

 

[Ado]

I added one about a month ago. It's oversized for my tank, so I've turned it off a couple times when it was hot inside because I had all the windows open. It's running at a flow rate that should take care of parasites and things like that. What's your question?

Basically is it worth the effort to either add to the plumbing, like cut into and add new pvc or basically create a new route from sump into display. The only issue I had was the lines into the uv are basically held in with pressure by a slightly smaller circumfrance pipe. I don't trust it lol

 

[evilexotica]

Wonder if this would be enough super glue

Never enough according to @Thuan

 

[Thuan]

question is.... with flow or without.... (I measure with flow on and take an average)

I was told to turn off everything when I measure