Show your nano aquarium here!
- Nano Build
- Thread starter revhtree
- Start date
- Tagged users None
BubbleFullOfStars
Community Member
- Joined
- Feb 25, 2021
- Messages
- 47
- Reaction score
- 41
- Location
- Sammamish
- What state or country do you live in
- Washington
Wow These are all great tanks. Here the link to my pre-fish IM Nano fusion 20.
www.reef2reef.com
New build
My new build is an IM Nano Fusion 20 pro, which I’ve upgraded. APS aluminum stand Lighting - 2 AI Prime 16HDs Return pump - Mighty Jet 528gph Skimmer - IM desktop DC Skimmer Reactor - IM DC desktop reactor Chiller - chill solutions UV Sterilizer - IM Desktop UV Ster. Heater - Cobalt...
www.reef2reef.com
Bigdaddy05
Well-Known Member
- Joined
- Mar 19, 2020
- Messages
- 540
- Reaction score
- 518
- Location
- near Buffalo,ny
- What state or country do you live in
- New York
Jon F
Community Member
Hi all, here's my humble nano. An Aqua One Nano 35.
I like to tinker with stuff and have modified the system a little. Removed the noisy inefficient skimmer and added a small canister filter running RowaPhos. I have an ehiem 600 CompactOn on order to replace the standard return pump. Ehiem 6015 powerhead, this is too much flow, so I'm going to replace that with the old return pump as a powerhead.
Set this all up after Xmas, dropping a few grains of food in every other day. CUC and a couple of soft corals were the first introduction near the end of February.
Yesterday I added a Peppermint Shrimp and a Talbots Damsel, beautiful fish, but not for a busy tank as they can be aggressive like any damsel.
Plans for the future, one centerpiece hard coral, thinking torch or hammer. A shrimp/gobi pair.
Doing weekly WC of 2 gallons (so much easier than my last tank!) perams = 0 Ammonia 0 Nitrite 0.5 Nitrate 8.1 Ph.
Love looking through this thread for inspiration
That's it.
I like to tinker with stuff and have modified the system a little. Removed the noisy inefficient skimmer and added a small canister filter running RowaPhos. I have an ehiem 600 CompactOn on order to replace the standard return pump. Ehiem 6015 powerhead, this is too much flow, so I'm going to replace that with the old return pump as a powerhead.
Set this all up after Xmas, dropping a few grains of food in every other day. CUC and a couple of soft corals were the first introduction near the end of February.
Yesterday I added a Peppermint Shrimp and a Talbots Damsel, beautiful fish, but not for a busy tank as they can be aggressive like any damsel.
Plans for the future, one centerpiece hard coral, thinking torch or hammer. A shrimp/gobi pair.
Doing weekly WC of 2 gallons (so much easier than my last tank!) perams = 0 Ammonia 0 Nitrite 0.5 Nitrate 8.1 Ph.
Love looking through this thread for inspiration
That's it.
Last edited:
Nhjmc
Well-Known Member
- Joined
- Jan 21, 2020
- Messages
- 506
- Reaction score
- 301
- Location
- New Hampshire, USA
- What state or country do you live in
- New Hampshire
OMG what are those adorable tiny pico tanks?
EdR
New Member
- Joined
- Feb 25, 2021
- Messages
- 6
- Reaction score
- 5
- Location
- St. Louis MO
- What state or country do you live in
- Missouri
Nice scape. How do you keep your glass so clean and no algae and no red bloom? Do you leave white lite on?
Just a year old, taking things slow. Finally getting through the worst of the uglies. It was pretty bad for a while
ScottJ
Well-Known Member
Thank you for the kind words, BUT I have algae, like, lots lol! Pic was taken right after a tooth brush scrub sesion. Tank is just a year old, and finally starting to get over the ugly stage. Started with dry rock and bagged live sand. Stock light. It's getting there.
thewire
Active Member
how you water sealed those magnet on the frag rack? The rack is 3D printed.My Nuvo 10 mixed reef coming along nicely
1
154162
Guest
10 month old Fluval Evo 13.5 with ai prime and Nero 3
