Somatic Filtration System Giveaway

Gluemasters - your best choice for CA super glue
Jump to Last
AS
FB page liked!!!
I love the modular design and the way that all the parts fit for maximum efficiency. Looks like something an industrial designer or systems engineer would think of and create! I love that they support Sicce return pumps, and that this is designed with return pump module in mind, and that the return pump doesn't take up gallons and gallons of space, but rather the amount that it should take up, which is a rather small footprint. This saves room for many other modules, and skimmer to fit, so that this really can be used with a cube. I have a 60 gallon cube that I love, but am not using, because the sump I have is too big, making me use a stand that's too big. The space this saves is awesome!!! I wonder if there is a module for a refugium???
I would love to buy the 120 sump to replace the Red Sea sump I am using; this would be an amazing sump system to have and use!
http://somaticaquaristik.com/somatic-120s-skimmer-and-sump-filtration-system/
 
Last edited:
Deltec
#2 Done. the total package capabilities of this sump is amazing. I like the whole list of options.
 
I also love the attention to detail, with the dosing line holders and sensor holders, the titanium screws and the corners/edges of the sump. It just looks cool on top of being super functional, which is a difficult trick to pull off in industrial design. Normally you get one or the other but not both! In this case, form, function, and appeal all get perfect 10's!!

I would love to use the triple stack vessel; the way this one was built is a real space saver! I didn't even think of stacking vertically!
I could not find a way to link the triple stack except from the gallery, but here is a link to it:
http://somaticaquaristik.com/wp-content/uploads/2017/06/17-1024x430.jpg
 
Last edited:
I love the integration of the ATO with the sump: it is super simple with a float valve, which works fine, and just fits right on the side of the sump. Super clean design, super cool way to add an ATO, and looks like it was designed with the consumer in mind, not necessarily how much money can be made off the consumer (although I know that the company did financial evaluations of the product, NPV, IRR, COGS). The ATO is well designed, and one of my favorite modules, after taking a close look at the Somatic filtration system. I like these products more and more as I look at them!

I would love to have one of their sensor holders or line holders. For some reason, the ones that I have are just no good. These have titanium screws, and look well-made, and also look like they will hold onto the sump well too:
http://somaticaquaristik.com/wp-content/uploads/2017/06/12-1024x432.jpg
 
Last edited:
www.dinkinsaquaticgardens.com
Reef News said:
somatic giveaway.jpg

Somatic Filtration System Giveaway

The Somatic 60 Filtration System is the perfect sump for cube tanks or other nano-systems that require a well thought out modular sump system. With modular add-on components like the Return Pump Basket or the Filter Sock Holder you can customize the sump with the accessories that you need and are purpose built components that will fit perfectly within the 60 Filtration System. By just adding your favorite return pump and heater you will have a ready-to-run sump system.

How to Enter:

You may complete one of the following entry methods or complete them all for multiple entries!

1. LIKE the Somatic Aquaristik Here

2. Check out the Somatic 60s Skimmer and Sump Filtration System product page and tell us what features you like about this product as a post in this thread.

3. Check out the other Somatic Products and post a link in this thread to one of the products you might like to try in the future.

*Once you have completed your entries you will have created a post in this thread for each one. A total of three (3) entries are possible so you would have three (3) separate posts if you completed all entries. Winner will be subject to verifying that the requirements were met in a timely manner.


The Prize:

The winner will receive a Somatic 60s Skimmer and Sump Filtration System shipped to your door and will include the following:

60 Filtration System
60s Space Saving Protein Skimmer
60 Return Pump Basket
60 Return Pump Basket Filter
60 Filter Sock Holder
60 Filtration Drain Cover

And a choice between the following:
60 Double Stack Dosing Vessel
60 Triple Stack Dosing Vessel

Total MSRP value- $576.92


1.jpg

2.jpg

3.jpg



Thanks again to Vertex Technologies for this awesome giveaway!

*Please note the contest is open until September 14th*
Click to expand...
Item one complete!!!
 
#3 is done. I would like to try the somatic 60 triple stack vessel 0.5 - 1 - 1.5 L
 
Avast
#2 I am planning a 60 gallon cube build with the Somatic 60S filtration system as the center piece, I like the modular design and small footprint!
 
#3 I am planning a 60 gallon cube build with the Somatic 60S filtration system as the center piece, I will likely be using all of the modular components so in terms of other products I would like to try, that would be all of them.
 
Ecoscape Reef Rock
#2 I like how compact the sump is designed and the fact we can add the features options to tailor to our needs.

I also like the design of the ATO for the other sumps.
 
Deltec

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Dream. Explore. Discover.
Deltec
Chewy.com
TCK Corals
Tidal Gardens
Top Shelf Aquatics
World Wide Corals
Dinkins Aquatic Gardens
Nutramar Foods
New Posts
Back
Top