Some assistance with ATO/AWC setup

[Fmelindy]

So I cant figure out how to get this working. I have a 2 sensor setup with a mechanical float switch on top and an optical switch on bottom. Set up the two sensors on the ATO/AWC functionality on ghl control center. Assigned the float switch as sensor 1 and the optical as sensor 2.

I have a pump for drain water, and separate ones for each of ATO and AWC. I have the ATO working perfectly but cant get the AWC part to work. It will drain water no problem but the water goes on down past the optical sensor (mounted horizontally) with no effect - it does not cause the AWC fill pump to turn on. Tried another optical switch there just to make sure it wasnt just a faulty switch with same outcome.

Cant figure it out for the life of me!

 

[Vinny@GHLUSA Verified Sponsor]

Go through your settings and make sure everything is set correctly.

How to setup AWC control with ProfiLux

www.aquariumcomputer.com

 

[Fmelindy]

yes, i followed that guide when setting it up, that's why i don't understand what is going wrong here. Of course, the guide is written for GHL Connect but I am unable to get GHL connect to ... well, connect reliably! So i have to do it in control center. Any similar guide for control center or any reason to believe it might be different somehow?

 

[Vinny@GHLUSA Verified Sponsor]

Search our YT channel and you'll find the GCC version:

 

[Fmelindy]

Thanks, that was useful but still didnt work. Ultimately I did end up fixing it - by simply unplugging all the sensors and the y cable and plugging them all back in. Weird but the unit had ceased to recognize the second float switch plugged into the y cable.

 

[FLSharkvictim]

yes, i followed that guide when setting it up, that's why i don't understand what is going wrong here. Of course, the guide is written for GHL Connect but I am unable to get GHL connect to ... well, connect reliably! So i have to do it in control center. Any similar guide for control center or any reason to believe it might be different somehow?

GHL was very confusing for me and hooking it all up to my PC!! That's why I sold my GHL controller and GHL Dosing pump and bought an Apex & a DOS since they are much easier to work with in my personal opinion. Plus, I am a MAC GUY which GHL does not support

 

[Vinny@GHLUSA Verified Sponsor]

GHL was very confusing for me and hooking it all up to my PC!! That's why I sold my GHL controller and GHL Dosing pump and bought an Apex & a DOS since they are much easier to work with in my personal opinion. Plus, I am a MAC GUY which GHL does not support

Sorry, but that is incorrect and misleading. You can see here mac setup is 100% doable:
Who said you need a PC to setup the ProfiLux? | REEF2REEF Saltwater and Reef Aquarium Forum