- Joined
- Mar 2, 2017
- Messages
- 1,380
- Reaction score
- 467
Anyone have any experience with sps receding at the base? It doesn’t seem to be stn’ ing, seems like parts where it is encrusted seems to be pulling back/disappearing. Could that be a flow issue?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Alk has been pretty consistent with my calcium reactor. PO4 is at 0.15. Nitrates have been pretty low between 2-5, could that be it?Low nutrients and alk dips are two things that seem to cause base recession. What's your PO4 and fish load/feeding regimen like?
After seeing the pic it is different than my experience from crabs.
If I was to guess, it might be due to low nitrates. Maybe my nitrates bottom out or are just too low, considering this piece is getting 500parI have this same issue sometimes. Following
500 par from what lights?If I was to guess, it might be due to low nitrates. Maybe my nitrates bottom out or are just too low, considering this piece is getting 500par
G5 radion pros with t5 supplements.500 par from what lights?
They’re getting about 8 hours at 500I don’t see any PE on any of your other acros. How many hours are they receiving 500 par?
Yes, at least i believe I’m feeding them enough! You may be right about running 500 with leds. Maybe I’ll dial that down and see if it has any positive effectN and P are fine. Are you feeding the fish enough - ammonia/ammonium from the fish waste is really the only source of nitrogen for SPS?
I would very wary of giving any acropora 500 PAR from a Radion alone... the quality is just not there to go that high and 350 is a good place to stop for most people. 500 PAR from T5 or a MH is usually no issue, so you have to really pay attention to the light source when people post about PAR that they are getting a coral.
My nitrates are 5If I was to guess, it might be due to low nitrates. Maybe my nitrates bottom out or are just too low, considering this piece is getting 500par

