Flameback Pair
started reefing 1999
Which output on this membrane housing is the product water output?
standard RO membrane housing
- Thread starter Flameback Pair
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
CoralClark
Stick Head
How should it be for a dual membrane setup? I took mine all apart and not sure if I have it right now. I'm getting 0tds out of it so I'm assuming I have it right.ReeferBee nailed it.
It looks a little something like this:
Ok, cool. I would check out this video here. It's a step by step on installing the second membrane
What's your TDS at?
Ahhh, bummer. Yeah that is a little too high for the dual system. Do you have a water softener? If so and you aren't running your RODI downstream from it I would recommend doing so That might get you down to where you need to be for a dual membrane setup.
That might get you down to where you need to be for a dual membrane setup.
hejjo
Well-Known Member
I know right. I do have a water softer but it jus started leaking from the head recently so I picked up a refurbished one. B4 it started leaking the previous owner never put salt in it so I'm hoping it's been leaching and when I replace it my tds will drop. What's the tds range that's considered ok for dual membrane? Been while so I don't recall. Thanks!
We recommend running them below 300 TDS. There's no real harm in using a dual setup past 300 TDS, but you'll start to burn through your DI resin pretty quick.
No problem!
